Pramet

Milling & Lathing

CATEGORIES

Viewing 1 - 20 of 104 products
Compare selected 0/8
Display:
Price
(Price shown excludes GST)
Description
Part Details
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • HK$1,502.20Each
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle93°
  • SeriesSDJCR
  • For Use WithDCMT 11T3
  • Length100mm
See similar products in Lathe Tool Holders & Inserts
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • HK$1,314.651 Box of 10
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Lathe PartLathe Insert
  • Approach Angle95°
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
See similar products in Lathe Tool Holders & Inserts
Pramet TNMA Series Lathe Insert, 4.76mm Height, 16.5mm Length
  • HK$903.401 Box of 10
Pramet TNMA Series Lathe Insert, 4.76mm Height, 16.5mm Length
  • Lathe PartLathe Insert
  • SeriesTNMA
  • Length16.5mm
  • Height4.76mm
See similar products in Lathe Tool Holders & Inserts
Pramet SCLCR/L Series Lathe Tool Holder for Use with CCMT 09T3, 16mm Height, 95° Approach, 150mm Length
  • HK$1,541.80Each
Pramet SCLCR/L Series Lathe Tool Holder for Use with CCMT 09T3, 16mm Height, 95° Approach, 150mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesSCLCR/L
  • For Use WithCCMT 09T3
  • Length150mm
See similar products in Lathe Tool Holders & Inserts
Pramet Square Milling Insert 9.53mm Side Length, 3.5mm Bore Diameter
  • HK$1,226.371 Box of 10
Pramet Square Milling Insert 9.53mm Side Length, 3.5mm Bore Diameter
  • TypeIndexable
  • ShapeSquare
  • Bore Diameter3.5mm
  • Side Length9.53mm
See similar products in Milling Inserts
Pramet LFMX Series Lathe Parting Off Insert for Use with XLCFN, 90° Approach, 2.2mm Length
  • HK$1,340.271 Box of 10
Pramet LFMX Series Lathe Parting Off Insert for Use with XLCFN, 90° Approach, 2.2mm Length
  • Lathe PartLathe Parting Off Insert
  • Approach Angle90°
  • SeriesLFMX
  • For Use WithXLCFN
  • Length2.2mm
See similar products in Lathe Tool Holders & Inserts
Pramet Rhombic Milling Insert 16mm Side Length, 4.5mm Bore Diameter
  • HK$1,550.331 Box of 10
Pramet Rhombic Milling Insert 16mm Side Length, 4.5mm Bore Diameter
  • TypeIndexable
  • ShapeRhombic
  • Bore Diameter4.5mm
  • Side Length16mm
  • Height6.25mm
See similar products in Milling Inserts
Pramet TN UN EXT Series Lathe Insert, 3.47mm Height, 90° Approach, 16.5mm Length
  • HK$223.58
    Each (In a Pack of 5)
Pramet TN UN EXT Series Lathe Insert, 3.47mm Height, 90° Approach, 16.5mm Length
  • Approach Angle90°
  • Lathe PartLathe Insert
  • SeriesTN UN EXT
  • Length16.5mm
  • Height3.47mm
See similar products in Lathe Tool Holders & Inserts
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • HK$1,910.431 Box of 10
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • TypeIndexable
  • ShapePentagon
  • Bore Diameter5.5mm
  • Side Length9mm
  • GradeM8345
See similar products in Milling Inserts
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • HK$1,337.72Each
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle90°
  • SeriesDTGNR
  • For Use WithTN/TNM Inserts
  • Length125mm
See similar products in Lathe Tool Holders & Inserts
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • HK$6,011.32Each
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • Diameter63mm
  • Bore Size22mm
  • Number of Inserts5
  • Depth of Cut2mm
  • Height40mm
See similar products in Face Mills
Pramet TN M EXT Series Lathe Insert, 3.47mm Height, 90° Approach, 16.5mm Length
  • HK$187.116
    Each (In a Pack of 5)
Pramet TN M EXT Series Lathe Insert, 3.47mm Height, 90° Approach, 16.5mm Length
  • Approach Angle90°
  • Lathe PartLathe Insert
  • SeriesTN M EXT
  • Length16.5mm
  • Height3.47mm
See similar products in Lathe Tool Holders & Inserts
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • HK$117.36
    Each (In a Pack of 10)
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
See similar products in Lathe Tool Holders & Inserts
Pramet CTFPR Series Lathe Tool Holder for Use with TPMR 1103, 20mm Height, 91° Approach, 180mm Length
  • HK$1,860.70Each
Pramet CTFPR Series Lathe Tool Holder for Use with TPMR 1103, 20mm Height, 91° Approach, 180mm Length
  • Approach Angle91°
  • Lathe PartLathe Tool Holder
  • SeriesCTFPR
  • For Use WithTPMR 1103
  • Length180mm
See similar products in Lathe Tool Holders & Inserts
Pramet TN UN EXT Series Lathe Insert, 3.47mm Height, 90° Approach, 16.5mm Length
  • HK$223.58
    Each (In a Pack of 5)
Pramet TN UN EXT Series Lathe Insert, 3.47mm Height, 90° Approach, 16.5mm Length
  • Approach Angle90°
  • Lathe PartLathe Insert
  • SeriesTN UN EXT
  • Length16.5mm
  • Height3.47mm
See similar products in Lathe Tool Holders & Inserts
Pramet 19° Face Mill 50mm, Diameter, 4, Pieces
  • HK$5,393.13Each
Pramet 19° Face Mill 50mm, Diameter, 4, Pieces
  • Diameter50mm
  • Bore Size22mm
  • Number of Inserts4
  • Depth of Cut2mm
  • Number of Pieces4
See similar products in Face Mills
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • HK$917.801 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCCMT
  • For Use WithSCLCR 09
  • Length9.7mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • HK$1,216.501 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCCMT
  • For Use WithSCLCR 09
  • Length9.7mm
See similar products in Lathe Tool Holders & Inserts
Pramet SDQCR Series Lathe Tool Holder for Use with DCMT 11T3, 20mm Height, 107° Approach, 180mm Length
  • HK$1,956.00Each
Pramet SDQCR Series Lathe Tool Holder for Use with DCMT 11T3, 20mm Height, 107° Approach, 180mm Length
  • Approach Angle107°
  • Lathe PartLathe Tool Holder
  • SeriesSDQCR
  • For Use WithDCMT 11T3
  • Length180mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCGT Series Lathe Insert for Use with SCLCR 06, 9.525mm Height, 80° Approach, 4.22mm Length
  • HK$1,447.301 Box of 10
Pramet CCGT Series Lathe Insert for Use with SCLCR 06, 9.525mm Height, 80° Approach, 4.22mm Length
  • Approach Angle80°
  • Lathe PartLathe Insert
  • SeriesCCGT
  • For Use WithSCLCR 06
  • Length4.22mm
See similar products in Lathe Tool Holders & Inserts
Recently Searched
Frequently Asked Questions
Need help?
Call our Customer Services team on:
852 24219898
Services
About RS
Hot Topics
Contact us
852 2421 9898
© RS Components Ltd
P.O. Box 80108 Cheung Sha Wan Post Office Hong Kong
Payment options