STMicroelectronics, Thyristor 1.2 kV, 60 A 50 mA 525 A 10 V
- RS Stock No.:
- 228-3060P
- Mfr. Part No.:
- STTD6050H-12M2Y
- Manufacturer:
- STMicroelectronics
The image is for reference only, please refer to product details and specifications
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 228-3060P
- Mfr. Part No.:
- STTD6050H-12M2Y
- Manufacturer:
- STMicroelectronics
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Rated Average On-State Current Irms | 60A | |
| Product Type | Thyristor | |
| Thyristor Type | SCR | |
| Package Type | ACEPACK SMIT | |
| Repetitive Peak Reverse Voltage VDRM | 1.2kV | |
| Surge Current Rating | 525A | |
| Mount Type | Surface | |
| Maximum Gate Trigger Current Igt | 50mA | |
| Pin Count | 9 | |
| Maximum Gate Trigger Voltage Vgt | 1.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Holding Current Ih | 100mA | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Peak On-State Voltage | 10V | |
| Automotive Standard | AEC-Q101 | |
| Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Rated Average On-State Current Irms 60A | ||
Product Type Thyristor | ||
Thyristor Type SCR | ||
Package Type ACEPACK SMIT | ||
Repetitive Peak Reverse Voltage VDRM 1.2kV | ||
Surge Current Rating 525A | ||
Mount Type Surface | ||
Maximum Gate Trigger Current Igt 50mA | ||
Pin Count 9 | ||
Maximum Gate Trigger Voltage Vgt 1.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Holding Current Ih 100mA | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Peak On-State Voltage 10V | ||
Automotive Standard AEC-Q101 | ||
The STMicroelectronics STTD6050H-12M2Y is a top cooled surface mount module that integrates a single-phase half-controlled bridge rectifier. It is rated at 1200 V and delivers an output full wave DC current up to 75 AAV. Each single embedded device has a rated current of 60 ARMS and a symmetric blocking voltage of 1200 V. With its top cooling pad opposite to the printed circuit board this device allows the PCB-module-heat sink stack to be automatically assembled.
1200 V symmetrical blocking voltage
High junction temperature: 150 °C
High noise immunity, static dV/dt: 1000 V/μs
Embed two TN6050HP-12 and two STBR6012 dies
Module qualified according to AQG324 recommendation
SMD with isolated top cooled tab
Terminal pins opposite to cooling side
Related links
- 3504/CCE/VH/X/XX/1/8/XXX/G/D4/LO/R4 | Eurotherm 3504 PID Temperature Controller 6 Output Analogue Logic 100
- Amphenol Industrial Circular Connector RTS0L-xxCG Series
- ebm-papst W2S130 Series Axial Fan AC Operation 39W 150 x 55mm
- 3M 101 40 Way Cable Mount D-sub Connector Plug, 1.27mm Pitch
- RS PRO Control Cable 0.5 mm² Screened Grey PVC Sheath, 20 AWG
- Schneider Electric Harmony XB4 Series Push Button 22mm Cutout IP66 IP69(IP69K)
- 6220-AZBB-ZBZZ | Herga General Purpose Momentary Foot Switch - Thermoplastic Case Material 3 A@ 250 V ac Contact Current, 250V
- RS PRO Fibre Optic Sensor 110 mm, IP65