SICK I150 Rope Pull Switch 203 mm, 2 NC

RS Stock No.:: 285-1830
Mfr. Part No.:: I150-RP224 / 1064511
Manufacturer:: SICK

Subtotal (1 unit)*

HK$2,495.50

FREE delivery for orders over HK$250.00

In Stock

2 unit(s) ready to ship from another location

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 +	HK$2,495.50

*price indicative

RS Stock No.:: 285-1830
Mfr. Part No.:: I150-RP224 / 1064511
Manufacturer:: SICK

Specifications

Product overview and Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SICK
	Product Type	Rope Pull Switch
	Contact Configuration	2 NC
	IP Rating	IP65
	Series	I150
	Minimum Operating Temperature	-25°C
	Contact Current	2A
	Contact DC Voltage	5V dc
	Maximum Operating Temperature	80°C
	Housing Material	Metal
	Standards/Approvals	China RoHS, cULus, EU DoC, IEC, UKCA
	Width	69mm
	Length	203mm
	Depth	85mm
	Hazardous Area Certification	No
	Mechanical Life	106Cycles

	Select all
	Brand SICK
	Product Type Rope Pull Switch
	Contact Configuration 2 NC
	IP Rating IP65
	Series I150
	Minimum Operating Temperature -25°C
	Contact Current 2A
	Contact DC Voltage 5V dc
	Maximum Operating Temperature 80°C
	Housing Material Metal
	Standards/Approvals China RoHS, cULus, EU DoC, IEC, UKCA
	Width 69mm
	Length 203mm
	Depth 85mm
	Hazardous Area Certification No
	Mechanical Life 106Cycles

Datasheet - i150-RP224

COO (Country of Origin):: DO

SICK I150 Series Rope Pull Switch, 203mm Length, Metal Housing - I150-RP224 / 1064511

This rope pull switch provides a manually operated safety cut-off for industrial lines and conveyor systems, designed for single-direction actuation and remote rope routing up to 75m. It features positive-action normally-closed contacts and a slow-action switching element suited to low-voltage safety circuits. The unit is housed in varnished die-cast lightweight metal and rated for protected use in dust- and water-prone environments.

Features and Benefits:

• 2NC contacts providing positive-action safety switching
• 2A current rating enabling low-voltage control circuits
• IP65 enclosure protecting against dust and water ingress
• Mechanical life 1e6 cycles supporting extended service intervals
• Operating range -25 to 80°C allowing wide ambient deployment

Applications

• Suitable for conveyor emergency-stop rope installations
• Ideal for long-run rope systems up to 75m
• Used with safety logic units requiring slow-action switching
• Can be used at sites requiring cULus and UKCA certification
• Used for safeguarding accessways in manufacturing plants

How is fault detection handled in this device?

It contains no internal fault detection, so connected safety logic must monitor faults.

What electrical connection does it use?

It connects via an M12 4-pin plug connector with a nickel-plated brass coupling nut.

What are the switching voltage and minimum switching current?

The switching threshold is ≥5V DC and the switching current specified is 5mA at 5V DC.

What short-circuit protection is required?

Short-circuit protection rated at 2A is specified for the switching circuit.

What mechanical actuation characteristics affect installation?

Actuation force is 125N at 300mm deflection and actuation frequency is ≤3,600 operations per hour.