Penta Beige Latex Electrical Protection Electrical Insulating Gloves, Size 9, Latex Coating
- RS Stock No.:
- 918-2265
- Mfr. Part No.:
- GLE36-1/09
- Manufacturer:
- Penta
Price 1 Pair**
Was HK$960.32
You pay
HK$656.60
58 In stock for delivery within 3 working days*
* Delivery dates may change based on your chosen quantity and delivery address.
FREE delivery for orders over HK$850.00
Pair(s) | Per Pair |
|---|---|
| 1 + | HK$656.60 |
**price indicative
- RS Stock No.:
- 918-2265
- Mfr. Part No.:
- GLE36-1/09
- Manufacturer:
- Penta
RoHS Status: Not Applicable
- COO (Country of Origin):
- FR
Latex Electrical Insulating Gloves Class 1
The latex insulating gloves have an ergonomic shape plus are lightly powdered on the inside to ensure the gloves are easy to slip on and off. Due to the gloves natural latex base they offer you high dielectric characteristics. The gloves must be used with a leather over glove for mechanical protection.
FEATURES:
Glove Class 1
Used for operating voltage 7500 V
Mechanical resistance with a leather over glove
High dielectric characteristics
Ergonomic shape
Lightly powdered
Easy to slip on and off
Natural latex base
Must be used with a leather over glove
Length 360 mm
Colour – Beige
Cut Edges
Category AZC
Various sizes available
Glove Class 1
Used for operating voltage 7500 V
Mechanical resistance with a leather over glove
High dielectric characteristics
Ergonomic shape
Lightly powdered
Easy to slip on and off
Natural latex base
Must be used with a leather over glove
Length 360 mm
Colour – Beige
Cut Edges
Category AZC
Various sizes available
Standards
EN 60 903:2003 et CEI 60 903:2002
PPE Category III = Irreversible risks
PPE Category III = Irreversible risks
Approvals
Glove Class 1, Category AZC
Sibille GLE36 1 Insulating Electricians Gloves
The Sibille reusable work gloves are a natural colour, high-quality, latex material for electricians making up a part of your personal protection equipment. This insulating safety work glove made from non-conductive natural rubber combines high dielectric and high strength grip with excellent electrical resistance. Capable of working voltage to 7500 V ac, and is tested to 10000 V ac this Class 1 safety glove is capable of withstanding high voltages whilst still holding its core properties. This work glove is anatomically shaped, flexible and durable offering maximum comfort and superior performance. A specially formulated exterior coating helps to ensure a positive grip in wet conditions and is to slip on and off. Each pair is electrically tested to meet standards.
Features and Benefits
- Designed specifically for electrical safety on applications up to 7500V
- Premium quality thick latex construction with an excellent grip
- Gauntlet design offers additional protection around the hand for easy working
- Recommended to use a leather glove for mechanical protection
- Durable and long-lasting work gloves that withstand knocks and scrapes
- Class 1 are proof tested to 10000V, but maximum working use of 7500V
- Certified EN60903 that offers the highest level of protection
- Size 9 Gloves
- Length of a glove is 36cm
Typical Applications
Electrical insulating gloves can be used both in indoor and outdoor working environments:
- Construction
- Utility
- Emergency services
- Engineering and manufacture
- Electrical maintenance
- Installations Wiring
FAQ's
Do these gloves need to be tested?
Electrical gloves need to be tested twice a year to ensure they are protecting you against low, medium and high voltages. Ensure to check the stamped dates on the gloves.
How to ensure gloves are fit for use?
It is important to air test these gloves before using to check for any holes as it could be dangerous. This can be done by blowing air into the glove and trapping it inside if no air leaks out then the glove is safe to use.
Standards
Glove Class 1, Category AZC
EN 60 903:2003
IEC 60 903:2002
PPE Category III = Irreversible risks
EN 60 903:2003
IEC 60 903:2002
PPE Category III = Irreversible risks
Attribute | Value |
|---|---|
| Glove Size | 9 |
| Primary Glove Application | Electrical Protection |
| Glove Material | Latex |
| Main Colour of Glove | Beige |
| Glove Coating | Latex |
| Number of Gloves | 1Pair |
| EN374 Chemical | No |
| EN407 Thermal | No |
| EN511 Cold | No |
| Additional EN Standards | EN 60903:2003 Class 1 |
| Complies with EN 61340-5-1 | No |