Nylon Tap Washer Washers, M8
- RS Stock No.:
- 280-521
- Manufacturer:
- RS PRO
View all Washers
Available for back order.
Price 1 Bag of 50
HK$61.93
| Bag(s) | Per Bag | Per unit* |
| 1 - 4 | HK$61.93 | HK$1.239 |
| 5 - 9 | HK$60.87 | HK$1.217 |
| 10 - 29 | HK$59.29 | HK$1.186 |
| 30 - 149 | HK$57.43 | HK$1.149 |
| 150 + | HK$47.27 | HK$0.945 |
| *price indicative | ||
Alternatives
This product is not currently available. Here are our alternative recommendations.
- RS Stock No.:
- 280-521
- Manufacturer:
- RS PRO
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- US
Product Details
Nylon 6.6 - Metric Washers
Plain metric sealing washers designed to distribute the force of the screw head of a screw or nut on a larger surface. These nylon washers provide an excellent inexpensive solution between gland and equipment with electrical insulation and good chemical resistance. Offering noise reduction because they are non-abrasive and lightweight in comparison to metallic washers.
Features & Benefits
Metric plain sealing washers
Nylon 6.6, natural
Provides electrical insulation
Ideal for use as a bearing surface
Non-corrosive
Good chemical resistance
Product Application Information
Can be used in various ways from distributing the load of a threaded fastener, as a bearing surface or spacer.
FAQs
Why would I need to replace a tap washer?
If your tap is dripping, no matter how much you tighten the tap then there is a good chance that the tap washer is worn or damaged and needs replacing. Tap washers are prone to wear and tear and when they are worn it allows a small amount of water through which drips from the tap.
Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.
Why would I need to replace a tap washer?
If your tap is dripping, no matter how much you tighten the tap then there is a good chance that the tap washer is worn or damaged and needs replacing. Tap washers are prone to wear and tear and when they are worn it allows a small amount of water through which drips from the tap.
Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.
Note
Specifications
| Attribute | Value |
| For Screw/Bolt Size | M8 |
| Washer Type | Tap Washer |
| Inside Diameter | 8.4mm |
| Outside Diameter | 18mm |
| Material | Nylon |
| Finish | Plain |
| Thickness | 2mm |
Available for back order.
Price 1 Bag of 50
HK$61.93
| Bag(s) | Per Bag | Per unit* |
| 1 - 4 | HK$61.93 | HK$1.239 |
| 5 - 9 | HK$60.87 | HK$1.217 |
| 10 - 29 | HK$59.29 | HK$1.186 |
| 30 - 149 | HK$57.43 | HK$1.149 |
| 150 + | HK$47.27 | HK$0.945 |
| *price indicative | ||
Alternatives
This product is not currently available. Here are our alternative recommendations.