PR Electronics 5437 Temperature Transmitter Various Input, 7.5 → 48 V dc
- RS Stock No.:
- 175-6334
- Mfr. Part No.:
- 5437A1
- Manufacturer:
- PR Electronics
1 In stock for delivery within 3 working days
Price Each
HK$4,046.50
Units | Per unit |
|---|---|
| 1 + | HK$4,046.50 |
- RS Stock No.:
- 175-6334
- Mfr. Part No.:
- 5437A1
- Manufacturer:
- PR Electronics
- COO (Country of Origin):
- DK
5437 HART 7 Single Input Temperature Transmitter
PR Electronics 5437 single input temperature transmitter offers unrivalled performance in the most demanding of applications to convert a wide array of input types to a 4 – 20 mA output signal. The transmitter has 4 input terminals allowing measurement of two, three or four wire RTDs. Configuring the transmitter with either HART 7 or HART 5 protocols provide flexibility and future proof communication.
Sensor Inputs
The PR 5437 provides unrivalled input versatility. Virtually any thermocouple or RTD plus linear resistance up to 100 kΩ, potentiometer, and bipolar mV signals. Input sensor redundancy function maintains process availability and safety in the event of primary sensor failure. An alert via HART can be used to allow scheduling of maintenance on the faulty sensor.
Installation Characteristics
Wiring - Innovative housing design means the 5437 temperature transmitter can be wired from either the inside or the outside of the terminals.
1/4” centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.
Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.
Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.
Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.
1/4” centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.
Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.
Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.
Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.
Features and Benefits
• LED provides visual notification of sensor, transmitter, and loop status
• HART 7 and HART 5 communication protocols
• Sensor drift detection maintains measuring point reliability
• Flexible input capability, with choice of output modes
• Superior accuracy ensures true, reliable measurements
• Fast response time easily supports safety and cost-critical applications
• Very low temperature coefficient ensuring maximum accuracy across changing ambient conditions
• High galvanic isolation (2.5 kVAC / 55 VAC) providing protection from ground loops, high voltage transients and common mode interference
• Runtime meters provide a valuable history of the process temperature and the ambient temperature around the transmitter
• HART 7 and HART 5 communication protocols
• Sensor drift detection maintains measuring point reliability
• Flexible input capability, with choice of output modes
• Superior accuracy ensures true, reliable measurements
• Fast response time easily supports safety and cost-critical applications
• Very low temperature coefficient ensuring maximum accuracy across changing ambient conditions
• High galvanic isolation (2.5 kVAC / 55 VAC) providing protection from ground loops, high voltage transients and common mode interference
• Runtime meters provide a valuable history of the process temperature and the ambient temperature around the transmitter
5437A1
The 5437A can be mounted in zone 2 and zone 22 / Class I, Division 1, Groups A, B, C, D.
Attribute | Value |
|---|---|
| Input Type | Linear Resistance, Potentiometer, RTD, Thermocouple, Voltage |
| Supply Voltage | 7.5 → 48 V dc |
| Diameter | 44 mm |
| Minimum Temperature Input | -200°C |
| Maximum Temperature Input | 850°C |
| Minimum Operating Temperature | -50°C |
| Maximum Operating Temperature | +85°C |
| Series | 5437 |
| Depth | 20.2mm |