RS PRO Aluminium Case for use with Raspberry Pi 4 in Silver
- RS Stock No.:
- 230-9822
- Manufacturer:
- RS PRO
Bulk discount available
Price Each**
HK$315.45
54 In stock for delivery within 3 working days*
* Delivery dates may change based on your chosen quantity and delivery address.
FREE delivery for orders over HK$850.00
Units | Per unit |
|---|---|
| 1 - 4 | HK$315.45 |
| 5 - 9 | HK$314.05 |
| 10 + | HK$313.17 |
**price indicative
- RS Stock No.:
- 230-9822
- Manufacturer:
- RS PRO
- COO (Country of Origin):
- GB
RS PRO Industrial Raspberry Pi 4 Enclosure
RS PRO is proud to introduce this excellent solution for the Raspberry Pi 4. This well-thought-out enclosure offers the very best in design and functionality and comes with a heatsink kit included. Upon inspection, the enclosure is supplied in kit form which is a pleasure to assemble with each part integrating seamlessly. The enclosure is made from aluminium and has 108 mm x 30 mm external dimensions.
What are the benefits?
The RS PRO Industrial Raspberry Pi 4 enclosure is a rugged enclosure kit. By utilising a micro HDMI Pi 4 extender board it can turn the power and micro HDMI connectors through 90°. The ethernet and USB connectors are on the same path, the rear panel is made from 3mm acrylic and allows for communication via Bluetooth and Wi-Fi signals from the Pi4. Comes with heatsink kit included.
Why would you choose this Pi enclosure?
The Raspberry Pi 4 is a delicate piece of hardware that needs to be safeguarded from external elements. This Pi enclosure once assembled is purpose-built to house the device inside and offers protection from contaminants, damage, or breakage.
Features and Benefits
- Raspberry Pi Case
- Exclusive to Raspberry Pi 4
- Heatsink kit included
- Aluminium material
- Rugged
- Passive extender board
- Dovetail slots down the side which accept a mounting bracket for surface mounting
- Supplied In kit form - Raspberry Pi not included
Dimensions
- Rear endplate thickness: 3 mm
- Front-end plate: 1.5 mm
- External dimensions: 108 mm x 30 mm
RS PRO Industrial Raspberry Pi 4 Enclosure Variants
Kit Contains
- (a) 8 M3 x 10 Taptite Screws
- (b) 14 M2.5 x 5 Screws
- (c) 4 12 mm Standoffs
- (d) 3 10 mm Standoffs
- (e) 1 Aluminium End Plate
- (f) 1 HDMI Extender PCB
- (g) 1 Aluminium Carrier Plate
- (h) 1 Aluminium Extrusion
- (I) 1 Acrylic End Plate
- (j) 1 Small Heat Block
- (k) 1 Small Heat Pad
- (l) 1 Large Heat Block
- (m) 1 Large Heat Pad
- (n) 2 M3 x 5 Screws
Assembly Instructions
1. Take carrier plate (g) & attach standoffs (c) & (d) with screws (b). Attach small heat block (j) and large heat block (l) to carrier plate (g) with screws (n).
Peel the backing paper from the small heat pad (k) & stick the small heat block (j). Do the same for large heat pad (m) & large heat block (l). Now remove the remaining backing paper.
2. Plug extender board (f) into the HDMI & USB connectors on the Raspberry Pi board.
3. Place Raspberry Pi & extender on carrier plate assembly & secure with screws (b).
4. Turn board assembly over so carrier plate is on top & slide into the top slot of extrusion (h) as shown.
5. Attach aluminium (e) & acrylic (i) end plates to extrusion (h) with screws (a).
Peel the backing paper from the small heat pad (k) & stick the small heat block (j). Do the same for large heat pad (m) & large heat block (l). Now remove the remaining backing paper.
2. Plug extender board (f) into the HDMI & USB connectors on the Raspberry Pi board.
3. Place Raspberry Pi & extender on carrier plate assembly & secure with screws (b).
4. Turn board assembly over so carrier plate is on top & slide into the top slot of extrusion (h) as shown.
5. Attach aluminium (e) & acrylic (i) end plates to extrusion (h) with screws (a).
Attribute | Value |
|---|---|
| For Use With | Raspberry Pi 4 |
| Colour | Silver |
| Series | RS PRO |
| External Dimensions | 108.50 x 30.00mm |
| Body Material | Aluminium |