Schneider Electric Adapter for use with Self-Supporting Cable, XACB961

A range of Schneider accessories from the Harmony XAC series for use with pendant control stations.

Suitable for all station types

This Harmony XACB961 is an adaptor for self-supporting cable with protective cable sleeve 10mm to 22mm. It is part of the range Harmony XAC pendant control stations for diameter 22mm plastic signaling units.

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support