RS PRO Capacitive Block Proximity Sensor, 10 mm Detection, PNP NC, 10 → 30 V dc

Need a reliable proximity sensor? Choose this RS PRO capacitive block type sensor to effectively detect and measure metallic and non-metallic objects without physical contact. It uses an electrical field to measure these objects, as well as the contents inside non-metal containers.
This unit is made from polybutylene terephthalate (PBT) to ensure it's strong and resistant to chemicals and heat. It has an Ingress Protection (IP) rating of IP67, so it's protected against dust and temporary immersion in water. The sensor also has reverse polarity and short circuit overload protection, so you can be sure it's safe to use. You can adjust its sensitivity as required. You'll see sensors like this one used in storage facilities as well as in livestock breeding environments.

• Block body style
• Detection range of 10 mm
• Dimensions of 50 (length) x 10 (width) x 20 mm (depth)
• PBT (Polybutylene Terephthalate) housing material
• IP (Ingress Protection) rating of IP67
• Maximum DC voltage of 30 V (volts)
• Maximum operating temperature of +55°C
• Minimum operating temperature of -10°C
• Non-flush mounting style
• Output type of PNP (Positive Negative Positive)
• Reverse polarity protection
• Capacitive sensor technology
• Shielded
• CE (Conformité Européenne) standards met
• Supply voltage of 10 to 30 V DC
• Switching current of 200 mA (milliamperes)
• Switching frequency of 30 Hz
• Cable terminal type