TE Connectivity End Cap Black, Polyolefin, 6.35mm
- RS Stock No.:
- 874-1500
- Mfr. Part No.:
- PD-CAP-1/4-0
- Manufacturer:
- TE Connectivity
Stock check temporarily unavailable - call for stock availability
Added
Price Each (In a Pack of 200)
Was HK$380.60
You pay
HK$1.317
| Units | Per unit | Per Pack* |
| 200 - 2800 | HK$1.317 | HK$263.40 |
| 3000 - 9800 | HK$1.264 | HK$252.80 |
| 10000 + | HK$1.211 | HK$242.20 |
| *price indicative | ||
- RS Stock No.:
- 874-1500
- Mfr. Part No.:
- PD-CAP-1/4-0
- Manufacturer:
- TE Connectivity
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- CZ
Product Details
PD Heat Shrink Cap
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
Features and benefits
• Easy and fast installation
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
PD CAP Kit contents
Note
PD Caps are not intended for use where immersion in fluids is required.
Specifications
Attribute | Value |
|---|---|
| Type | End Cap |
| Inside Diameter Primary | 6.35mm |
| Material | Polyolefin |
| Shrink Temperature | +125°C |
| Colour | Black |
| Minimum Operating Temperature | -55°C |
| Maximum Operating Temperature | +110°C |
| Shrunk Diameter Primary | 2.03mm |
| Standards Met | UL E85381 |
| Series | PD Caps |