onsemi FPAB30BH60B, Power Factor Pre-Regulator Circuit IC 20 kHz 27-Pin, SPMIC 253 Vrms
- RS Stock No.:
- 181-1939
- Mfr. Part No.:
- FPAB30BH60B
- Manufacturer:
- onsemi
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 181-1939
- Mfr. Part No.:
- FPAB30BH60B
- Manufacturer:
- onsemi
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Power Factor Pre-Regulator Circuit IC | |
| Start-up Supply Current | 60A | |
| Sub Type | Power Factor Pre-Regulator Circuit | |
| Maximum Sink Current | 5mA | |
| Switching Frequency | 20kHz | |
| Supply Current | 26mA | |
| Zero Power Detection | No | |
| Mount Type | Through Hole | |
| Package Type | SPMIC | |
| Minimum Supply Voltage | 187Vrms | |
| Pin Count | 27 | |
| Maximum Supply Voltage | 253Vrms | |
| Minimum Operating Temperature | -40°C | |
| Length | 44.2mm | |
| Width | 27 mm | |
| Height | 5.7mm | |
| Series | FPAB30BH | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Power Factor Pre-Regulator Circuit IC | ||
Start-up Supply Current 60A | ||
Sub Type Power Factor Pre-Regulator Circuit | ||
Maximum Sink Current 5mA | ||
Switching Frequency 20kHz | ||
Supply Current 26mA | ||
Zero Power Detection No | ||
Mount Type Through Hole | ||
Package Type SPMIC | ||
Minimum Supply Voltage 187Vrms | ||
Pin Count 27 | ||
Maximum Supply Voltage 253Vrms | ||
Minimum Operating Temperature -40°C | ||
Length 44.2mm | ||
Width 27 mm | ||
Height 5.7mm | ||
Series FPAB30BH | ||
Standards/Approvals No | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The FPAB30BH60B is an advanced PFC SPM® 3 module providing a fully-featured, high-performance Boost PFC (Power Factor Correction) input power stage for consumer, medical, and industrial applications. These single-phase modules integrate optimized gate drive of the built-in IGBT to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature a full-wave rectifier, and highperformance output diode for additional space savings and mounting convenience.
600 V - 30 A Single-Phase Boost PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Full-Wave Bridge Rectifier and High-Performance Output Diode
Built-in NTC Thermistor for Temperature Monitoring
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor