Keysight Technologies 34133A Test Lead, CAT II, 3A

The Keysight 34133A precision electronic test leads are designed specifically for working with small components and in dense circuit boards. The test leads are small, light and feature Keysight's patented browser concept, using a crown point pogo pin. The spring-loaded tip helps absorb those small movements and the crown point digs into solder. Each kit includes two test leads (one red and one black).

Termination - right angle shrouded banana plugs
Maximum current 3A
Rating 1000V CAT II
Length 1.2m (48 in)

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Keysight Technologies, each probe provides much-needed precision.

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

Monitor the electrical properties of your devices with these multimeter leads from Keysight Technologies. The crown-point pogo pin connector has a spring-loaded tip that absorbs pressure to give you stable contact for precise operation. These cables have a voltage rating of 1000V, so they can handle powerful surges to protect your devices against electrical damage. The leads are colour-coded for ease of identification.

• Length of 1.2m for a flexible connection between your multimeter and your components
• Banana plug design ensures a secure attachment
• Right-angled head makes it easy to fit into tight spaces
• Current rating of 3A for use in low-power applications
• Moulded connector makes it simple to plug in and remove

• Research and development
• Construction industry
• Battery testing

These test leads measure voltage, current and electrical resistance, making them a versatile choice.

Simply plug the black lead into the COM or common port to ground the circuit. Then plug the red lead into the mAVΩ port to take measurements.

Keysight