Ixxat Push-in to Female to Removable Push In Connector Interface Adapter

CAN/CAN FD repeater with push-in connector and 5 kV isolation voltage

The Ixxat CAN/FD Repeater Standard CAN/FD with two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.

• Robust for industrial use

• Interfaces: CAN FD, push-in connector;• CAN bit rates: Up to 1 Mbit/s.;• CAN/CAN FD bit rates: 14 kBit/s up to 8000 kBit/s.;• CAN termination: For each CAN/CAN FD channel; separately switchable by piano switch;• Throughput delay: Type. 175 ns (corresponds to approx. 35 m cable length);• Electrical decoupling: CAN-CAN and CAN-Power with at least 5 kV DC for 1 minute; CAN shield against earth and Power against earth with at least 2 kV DC for 1 minute;• Housing: Plastic top-hat rail housing