4D Systems microCAM-III uCAM-III Image Sensor, 1 fps UART, 5-Pin

RS Stock No.:: 175-7755
Mfr. Part No.:: uCAM-III
Manufacturer:: 4D Systems

4D Systems microCAM-III uCAM-III Image Sensor, 1 fps UART, 5-Pin

Bulk discount available

Subtotal (1 unit)*

HK$474.10

FREE delivery for orders over HK$250.00

In Stock

55 unit(s) ready to ship from another location

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 - 4	HK$474.10
5 - 9	HK$459.70
10 +	HK$450.50

*price indicative

RS Stock No.:: 175-7755
Mfr. Part No.:: uCAM-III
Manufacturer:: 4D Systems

Specifications

Product overview and Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	4D Systems
	Series	microCAM-III
	Product Type	Image Sensor
	Frame Rate	1fps
	Interface Type	UART
	Mount Type	Through Hole
	Pin Count	5
	Length	32mm
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	9V
	Pixel Size W x H	5.55 x 5.55 μm
	Colour Sensing	RGB
	Minimum Operating Temperature	-30°C
	Maximum Operating Temperature	85°C
	Height	15.6mm
	Width	32 mm
	Standards/Approvals	No
	Automotive Standard	No

	Select all
	Brand 4D Systems
	Series microCAM-III
	Product Type Image Sensor
	Frame Rate 1fps
	Interface Type UART
	Mount Type Through Hole
	Pin Count 5
	Length 32mm
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 9V
	Pixel Size W x H 5.55 x 5.55 μm
	Colour Sensing RGB
	Minimum Operating Temperature -30°C
	Maximum Operating Temperature 85°C
	Height 15.6mm
	Width 32 mm
	Standards/Approvals No
	Automotive Standard No

Datasheet

COO (Country of Origin):: CN

4D Systems serial camera module

The 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.

Features and Benefits

• 5VDC nominal supply

• Additions lenses available

• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images

• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions

• Compact in dimensions 32mmx32mmx21mm (without lens, including header)

• Locking nut for locking focus in place

• No external DRAM required

• On-board EEPROM provides a command-based interface to the external host via TTL serial link

• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions

• Small size, low cost and low powered camera module

• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images

4D Systems microCAM-III uCAM-III Image Sensor, 1 fps UART, 5-Pin

FREE delivery for orders over HK$250.00

4D Systems serial camera module

Features and Benefits

Related links