3M Black, Yellow Vinyl 33m Hazard Tape, 50mm x

  • RS Stock No. 121-8623
  • Mfr. Part No. 5702 50mmx33m
  • Manufacturer 3M
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

3M Hazard Tape

The 3M 5702 black/yellow safety stripe tape has been developed to provide you with a tape to mark out your hazards. The durable tape comes in 33 m lengths with the colour embedded into the tape to give you long-term resistance to abrasion, moisture and scuffing.
With a rubber adhesive and vinyl backing the 3M hazard tape has an excellent holding strength and helps prevent edge lifting.

Features and Benefits

Cost effective
Resists most common solvents, abrasions and moisture
Unique stretch properties
Easy to apply as a temporary or permanent solution

Typical Applications

Mark out hazard areas, lane and safety marking in factories, hospitals and warehouses.

Caution

Avoid ketones, esters and chlorinated hydrocarbons which can cause the backing to swell or degrade

Specifications
Attribute Value
Colour Black, Yellow
Backing Material Vinyl
Width 50mm
Length 33m
Thickness 0.14mm
Pre-printed None
Adhesion Strength 21 N/100 mm
Tensile Strength 260N/100 mm
Elongation at Break 170%
Maximum Operating Temperature +77°C
Minimum Operating Temperature +4°C
11 Within 3 working day(s) (Global stock)
42 Within 3 working day(s) (Global stock)
Price Each
HK$ 233.74
(exc. GST)
units
Per unit
1 - 14
HK$233.74
15 - 39
HK$224.43
40 +
HK$215.12
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...