Murrelektronik Limited, EMPARRO DIN Rail Power Supply, 24V dc Output Voltage, 40A Output Current

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Features and Benefits

• 150% power boost for at least 4 seconds
• Slim design
• Metal housing with protective EMC characteristics
• High mains failure bridging time
• Derating only at 60°C
• Seven different models provide solutions for many applications
• Efficiency up to 95%

Product Application Information

The wide input voltage range makes Emparro suitable for worldwide use.

//media.rs-online.com/t_line/L1236701-01.jpg

Switch Mode - Murrelektronik

Specifications
Attribute Value
AC or DC Output Voltage Dc
Input Voltage 400V ac
Output Voltage 24 V dc
Output Current 40 A
Power Rating 960W
Number of Outputs 1
Electrical Phase 2, 3
Type Switch Mode
Height 138mm
Width 109mm
Output Voltage Adjustment Range 24 → 28V
Minimum Temperature -40°C
Mounting Type DIN Rail
Maximum Temperature +70°C
Ripple And Noise 20mV ac
Special Features Optimum Performance, Reliable, Space Saving
Standards Met CULus, CULus Recognised, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, SEMI F47
Series EMPARRO
MTBF >775000h
Depth 182mm
11 In stock for delivery within 3 working days
Price Each
HK$ 4,334.34
(exc. GST)
units
Per unit
1 +
HK$4,334.34
Related Products
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...