Recently searched

    Fluke I410 Current Clamp, AC/DC Adapter, 400A ac Max, 400A Max, 4 mm Plug, Voltage Output

    RS Stock No.:
    237-4218
    Mfr. Part No.:
    1640967
    Manufacturer:
    Fluke
    Fluke
    View all Current Clamps
    Temporarily out of stock - back order for despatch 24/05/2023, delivery within 1 working days
    Add to Basket
    units

    Added

    Price Each

    HK$2,371.31

    unitsPer unit
    1 +HK$2,371.31
    RS Stock No.:
    237-4218
    Mfr. Part No.:
    1640967
    Manufacturer:
    Fluke

    RoHS Status: Not Applicable

    COO (Country of Origin):
    TH

    Product overview and Technical data sheets


    Legislation and Compliance

    RoHS Status: Not Applicable

    COO (Country of Origin):
    TH

    Product Details

    Fluke Current Probes


    Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.

    Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
    d.c. current zero control for nulling out jaw/sensor offset
    Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
    Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
    Battery check mode
    Compatible with meter input impedance ≥1MΩ
    Conforms to IEC 1010-1 Cat III 600V

    Supplied With: 9V PP3 alkaline battery and operators manual.

    FLUKE Current Clamp, 60h Battery Life, Hall-Effect Probe - 1640967


    Get a grip on electrical flow measurements with this current clamp from FLUKE. Wide jaws with a simple open and close lever make it a cinch to clamp a conductor inside. This means you can safely and conveniently check currents and wiring without disconnecting the circuit. The unit has a versatile Hall-effect type of probe, enabling you to take AC and DC current measurements between 1 and 400A for testing and monitoring industrial or domestic circuits. This current clamp easily plugs into multimeters and volt meter test instruments with its 1.6m cable, letting you access hard-to-reach networks.

    • Indicator light so you can see at a glance when it's operational
    • 60h battery life for reliability

    Applications


    • Automotive industry
    • HVAC equipment
    • Electrical engineering

    What's the safety category of this current clamp?


    The device has a safety category of CAT III 600V, meaning you can use it on busbars as well as distribution and branch circuits.

    How can I be sure this clamp maintains its accuracy?


    Simply adjust the product's dial to get a zero reading while the jaws are empty. This ensures your readings are accurate.


    Specifications

    AttributeValue
    Adapter TypeAC/DC
    Maximum DC Current400A
    Maximum AC Current400A ac
    Best Accuracy±3.5% + 0.5 A
    Maximum Conductor Size30mm
    Safety CategoryCAT III 600V
    Output TypeVoltage
    Connector Type4 mm Plug
    Maximum Bandwidth10kHz
    Battery Type9V
    Battery Life60 h
    Cable Length Extended1.6m
    Maximum Operating Temperature+50°C
    Minimum Operating Temperature-10°C
    Safety Category LevelCAT III
    Safety Category Voltage600V
    Model Number pI410
    Temporarily out of stock - back order for despatch 24/05/2023, delivery within 1 working days
    Add to Basket
    units

    Added

    Price Each

    HK$2,371.31

    unitsPer unit
    1 +HK$2,371.31