This range of FTDI breakout boards are designed to convert USB to serial or parallel interfaces. The UMFT201XB-01 (757-0054) bridges USB to I²C and the UMFT230XB-01 (757-0067) bridges from USB to a UART IC.
The UMFT201XB bridges from USB to I²C two-wire serial bus interface The UMFT220XB bridges from USB to Parallel 4-Bit FT1248 Interface The UMFT230XB bridges from USB to Basic UART (Universal Asynchronous Receiver/Transmitter) The breakout board converts USB 2.0 Full-Speed to a serial interface Serial signals on a 2.54mm (0.1”) pitch 10-pin female connector The module plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector The serial interface operate at +3.3V Input/Output pins are 5V tolerant
Attribute
Value
Classification
Breakout Module
Kit Classification
Breakout Module
Technology
USB2.0 to Full Speed I2C with Four Control Bus Line
