ESX10-T Electronic Circuit Protectors

Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics

Reliable overload disconnection with 1.1 x l_N plus, even with long load lines or small cable cross sections

Manual ON/OFF button (S1)

Status and failure indication through LED, status output SF or Si contact F

Integral fail-safe element adjusted to current rating

Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets

Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

Select all	Attribute	Value
	Brand	ETA
	Rated Operational Voltage	24 V
	Product Type	Busbar
	For Use With	ESX10-T
	Standards/Approvals	No
	Series	X222.611
	Pitch	59.5mm
	Number of Modules	5

	Select all
	Brand ETA
	Rated Operational Voltage 24 V
	Product Type Busbar
	For Use With ESX10-T
	Standards/Approvals No
	Series X222.611
	Pitch 59.5mm
	Number of Modules 5

ETA X222.611 Busbar, 24 V, 59.5 mm Pitch

ESX10-T Electronic Circuit Protectors

Approvals

Related links