LOG CMOS BUS INTRFCE OCTL

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

High-Performance Silicon-Gate CMOS, The MC74HC541A is identical in pin out to the LS541. The device inputs are compatible with Standard CMOS outputs. External pullup resistors make them compatible with LSTTL outputs. The HC541A is an octal non-inverting buffer/line driver/line receiver designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. This device features inputs and outputs on opposite sides of the package and two ANDed active-low output enables. The HC541A is similar in function to the HC540A, which has inverting outputs.

Output Drive Capability: 15 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS and TTL
Operating Voltage Range: 2 to 6V
Low Input Current: 1mA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 134 FETs or 33.5 Equivalent Gates

Specifications
Attribute Value
Logic Family HC
Number of Channels per Chip 1
Output Type 3 State
Polarity Non-Inverting
Mounting Type Surface Mount
Package Type SOIC
Pin Count 20
Maximum Propagation Delay Time @ Maximum CL 120ns
Dimensions 12.95 x 7.6 x 2.4mm
Height 2.4mm
Minimum Operating Supply Voltage 2 V
Width 7.6mm
Maximum Operating Supply Voltage 6 V
Length 12.95mm
Propagation Delay Test Condition 10pF
Maximum Operating Temperature +125 °C
Automotive Standard AEC-Q100
Minimum Operating Temperature -55 °C
On back order for despatch 27/12/2019, delivery within 3 working days
Price Each (On a Reel of 1000)
HK$ 1.96
(exc. GST)
units
Per unit
Per Reel*
1000 - 2000
HK$1.96
HK$1,960.00
3000 - 4000
HK$1.82
HK$1,820.00
5000 +
HK$1.699
HK$1,699.00
*price indicative
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...