Moflash Industrial ECO LED Beacons - LEDD100 Series
The LEDD100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing. The ECO LEDD beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode Continuously rated LED long life Low current consumption Suitable for surface, conduit box or wall mounting 3 point fixing 360° light output around the vertical axis Dustproof and weatherproof UV stable polycarbonate lens UV stable ABS plastic base 160 flashes per minute (FPM) IP65 protection RoHS compliant CE Marked
Moflash Red Flashing LED Beacon, 30V AC/DC, 90mm - LED100 Series - LED100-02-02
This Moflash red LED (light-emitting diode) beacon provides clear, sustainable signalling for your light commercial and industrial applications. The beacon has two alarm stages for added versatility, and you can easily switch between them using the jumper link on the internal PCB (printed circuit board). The flashing mode provides a rapid signal at 165FPM (flashes per minute) to attract the attention of people in the immediate vicinity, while the steady mode emits a constant, highly visible light. The lens is UV (ultraviolet) stable to help the beacon withstand direct sunlight in outdoor applications.
Features & Benefits
• IP65 (ingress protection) rating ensures the beacon is both dust-proof and protected against low-pressure water jets • A third wire connection terminal allows for convenient remote switching between modes • Low current consumption of 110mA for energy-efficient operation
Applications
• Food and beverage industry • Pharmaceutical industry • Rail and transport • Mining and quarrying
How do I mount this beacon?
This beacon is designed for surface mounting on a conveyor, a vehicle, a conduit box or a wall using the three built-in fixing points.
Attribute
Value
Supply Voltage
20 → 30 V ac/dc
Light Effect
Flashing
Lens Colour
Red
Mounting Style
Surface Mount
Bulb Type
LED
Current Type
AC, DC
Current Consumption
110mA
Housing Colour
Black
Lamp Included
Yes
Series
LEDD100
Multifunction
Yes
Height
119mm
IP Rating
IP65
Base Length
45mm
Minimum Temperature
-25°C
Standards Met
CE Certified
Base Width
90mm
Special Features
Dust Proof, Low Current Consumption, Water Resistant