Multimeter Leads | Multimeter Test Leads | RS
Recently searched

    Multimeter Leads

    Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

    Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

    We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

    We also offer a variety of Multimeters & Accessories for all your testing needs.

    Checking your Multimeter Leads:

    • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
    • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
    • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

    167 Products showing for Multimeter Leads

    Hirschmann Test & Measurement
    -
    Test Lead
    -
    Straight Plug
    1m
    16A
    -
    -
    -15°C
    +70°C
    CAT II
    Hirschmann Test & Measurement
    -
    Test Probe Lead
    -
    -
    1m
    16A
    1000V
    CAT II 1000V
    -15°C
    +70°C
    CAT II
    Hirschmann Test & Measurement
    -
    Test Probe Lead
    -
    -
    1m
    16A
    -
    -
    -15°C
    +70°C
    -
    Hirschmann Test & Measurement
    -
    Test Probe Lead
    -
    -
    1m
    16A
    -
    -
    -15°C
    +70°C
    -
    Fluke
    -
    Test Lead Kit
    -
    Right Angle to Straight
    -
    -
    -
    -
    -
    -
    -
    Chauvin Arnoux
    -
    Voltage Probe Set
    -
    -
    1.5m
    -
    -
    -
    -
    -
    -
    Chauvin Arnoux
    -
    Test Probe
    -
    4 mm Male
    -
    -
    -
    CAT IV 600 V
    -
    -
    -
    Staubli
    -
    Test Probe Kit
    -
    Straight to Right Angle
    1.5m
    20A
    1000V
    CAT II 1000V
    -
    +350°C
    CAT II
    Facom
    -
    Automotive Test Lead Kit
    Test leads
    -
    -
    -
    -
    -
    -
    -
    -
    Chauvin Arnoux
    -
    Probe Set
    Automotive Back Probe Lead
    4 mm Male
    -
    -
    -
    CAT II 300V
    -
    -
    -
    Chauvin Arnoux
    -
    Insulated Test Lead Set
    -
    Plug
    1.5m
    -
    -
    CAT III, CAT IV
    -
    -
    -
    Pomona
    -
    Test Lead
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Chauvin Arnoux
    -
    Insulated Test Lead Set
    -
    Plug
    1.5m
    -
    -
    CAT IV
    -
    -
    -
    Teishin Electric
    -
    Test Lead
    -
    -
    1m
    -
    -
    -
    -
    -
    -
    Teishin Electric
    -
    Test Lead
    -
    Crocodile Clip
    500mm
    -
    100V
    CAT III 100V
    -
    -
    CAT III
    Chauvin Arnoux
    -
    Insulated Test Lead Set
    -
    Plug
    1.5m
    -
    -
    -
    -
    -
    -
    Pomona
    -
    Test Probe Kit
    -
    -
    10mm
    -
    -
    CAT II 1000 V
    -
    -
    -
    Testo
    -
    -
    -
    -
    1225mm
    -
    -
    -
    -
    -
    -
    Chauvin Arnoux
    -
    Insulated Test Lead Set
    -
    Plug
    1.5m
    -
    -
    CAT IV
    -
    -
    -
    Mueller Electric
    -
    Test Probe Lead
    -
    -
    1m
    20A
    -
    -
    -50°C
    +80°C
    -
    Results per page