Cutters

Cutters are handheld tools designed for cutting a variety different materials, such as wires, and other smaller objects potentially too small to be worked on by hand. Typically consisting of two levers connected closer to one end by a fulcrum, with the shorter end forming the jaw, cutters come in a variety of types and sizes. The three basic types are locking, adjustable and non-adjustable.

In order to ensure user comfort, most models of cutters will have insulated handles, allowing you to be protected whilst working and providing a firm and comfortable grip. In addition to standard insulation or cushioning, some cutters will be VDE-insulated to protect the user when working with electrical equipment.

What are cutters used for?

While the name may be fairly clear, some variations of cutters can also be used to perform other actions. For example, linesmans cutters also have a small flat section along the jaw for gripping objects as well as their cutting surface. The application will dictate which is the best type of cutter for you to use.

Types of Cutters

Used by professionals and DIYers alike to cut wires effectively, there are many types of cutters designed for specific applications:

  • Diagonal cutters, also known as side cutters or side cutter pliers, are ideal for gripping, splicing or cutting wires, as well as stripping wire insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife or scissors.
  • End cutters are also known as nippers and are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat-bladed head, which allows for a cut close against the surface without digging into it.
  • Wire rope cutters are used for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable before performing a clean cut.
  • Snipe nose or needle nose cutters are designed to hold fine objects and cut them cleanly without applying pressure to the wider area, which larger cutters may do and cause damage.
  • Cable cutters or wire cutters are most commonly used in electrical applications and are designed specifically to be used with cables and wires. While most have some form of covered handle for user comfort, it is important not to confuse plastic or rubber coatings with electrical insulation.
  • Linesmans cutters are popular in communications and electrical tasks. They have a short gripping surface toward the tip of the jaw, and a cutting surface extends back to the fulcrum. They are ideal for cutting leads or stripping insulation.

For more information on cutters, cutter types and best practices, read our comprehensive guide here.


...
Read more Read less

Filters

Viewing 1 - 20 of 39 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Ductile Wire Cutting Capacity Iron Wire
RS Stock No. 755-4116
Mfr. Part No.425.MT
BrandFacom
HK$546.05
Each
units
- - Super Full Flush 110 mm 13.0mm - - - - 1.3mm - -
RS Stock No. 734-8876
Mfr. Part No.90370
BrandFacom
HK$458.97
Each
units
- - Diagonal Cutters 110 mm - - - - - 1.4mm - -
RS Stock No. 910-3189
Mfr. Part No.190.16CPESLS
BrandFacom
HK$343.55
Each
units
- - End Cutters 160 mm 6.5mm - Yes - Chrome Vanadium Molybdenum Steel - - -
RS Stock No. 194-2602
Mfr. Part No.405.E
BrandFacom
HK$616.19
Each
units
- - Side Cutters 110 mm - - - Yes - 1.3mm - -
RS Stock No. 910-3183
Mfr. Part No.190.20CPESLS
BrandFacom
HK$404.12
Each
units
- - End Cutters 200 mm 7.5mm - Yes - Chrome Vanadium Molybdenum Steel - - -
RS Stock No. 914-8448
Mfr. Part No.435.RE
BrandFacom
HK$683.47
Each
units
- - Electronic Cutters 110 mm 13.0mm - - Yes - 1.2mm - -
RS Stock No. 205-4936
Mfr. Part No.417.SPE
BrandFacom
HK$776.14
Each
units
- - Electronics Diagonal Cutters 110 mm 10.5mm - - Yes - 0.7mm - -
RS Stock No. 193-5609
Mfr. Part No.192A.18CPE
BrandFacom
HK$294.87
Each
units
- - - 190 mm - - - - - - - -
RS Stock No. 910-3186
Mfr. Part No.192.20CPESLS
BrandFacom
HK$403.23
Each
units
- - Diagonal Cutters 200 mm 22.0mm - Yes - Chrome Vanadium Molybdenum Steel - - -
RS Stock No. 176-0703
Mfr. Part No.406.E
BrandFacom
HK$630.45
Each
units
- - Diagonal Cutters 110 mm - - - Yes - 1.3mm - -
RS Stock No. 193-5603
Mfr. Part No.391A.16CPE
BrandFacom
HK$351.60
Each
units
- - - 160 mm - - - - - - - -
RS Stock No. 769-1707
Mfr. Part No.405.12
BrandFacom
HK$569.96
Each
units
- - Side Cutters 120 mm - - - - - 2.0mm - -
RS Stock No. 188-3922
Mfr. Part No.416.12MT
BrandFacom
HK$554.79
Each
units
- - Semi Flush 125 mm 16.0mm - - - - 1.6mm - -
RS Stock No. 191-4080
Mfr. Part No.406.MT
BrandFacom
HK$517.43
Each
units
- - Diagonal Cutters 110 mm - - - - - 0.4mm - -
RS Stock No. 466-081
Mfr. Part No.418.MT
BrandFacom
HK$559.89
Each
units
- - End Cutters 120 mm - - - - - 0.6mm - -
RS Stock No. 176-0725
Mfr. Part No.407.E
BrandFacom
HK$762.18
Each
units
- - Diagonal Cutters 110 mm - - - Yes - 1.3mm - -
RS Stock No. 910-3177
Mfr. Part No.192.16CPESLS
BrandFacom
HK$313.81
Each
units
- - Diagonal Cutters 160 mm 18.0mm - Yes - Chrome Vanadium Molybdenum Steel - - -
RS Stock No. 205-4829
Mfr. Part No.406.8MT
BrandFacom
HK$611.43
Each
units
- - Electronics Diagonal Cutters 110 mm 9.0mm - - - - 1.0mm - -
RS Stock No. 194-2618
Mfr. Part No.417.PE
BrandFacom
HK$754.19
Each
units
- - Diagonal Cutters 110 mm - - - Yes - 0.8mm - -
RS Stock No. 188-3962
Mfr. Part No.407.MT
BrandFacom
HK$616.27
Each
units
- - Diagonal Cutters 110 mm - - - - - - - -