Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 121 - 137 of 137 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 827-3657
Mfr. Part No.3443-82-04
Brand3M
HK$3,063.56
Each
units
Locator 451 4 3443
RS Stock No. 803-4367
Mfr. Part No.1205655
HK$177.23
Each
units
Locator CF 3000 LOC 1.0 - -
RS Stock No. 876-2034
Mfr. Part No.1579005-1
HK$109.79
Each
units
Spring ERGOCRIMP - -
RS Stock No. 864-3434
Mfr. Part No.354005-1
HK$905.99
Each
units
Shear Blade - - -
RS Stock No. 179-2469
Mfr. Part No.18.3805
HK$897.10
Each
units
Locator MES-CZ-CT1,5 - -
RS Stock No. 876-2046
Mfr. Part No.303848-2
HK$584.35
Each
units
Pin - - -
RS Stock No. 765-9848
Mfr. Part No.15021/SP
BrandBulgin
HK$1,622.59
Each
units
Positioner 6000 8 -
RS Stock No. 179-2468
Mfr. Part No.18.3804
HK$917.93
Each
units
Locator MES-CZ-CT1 - -
RS Stock No. 175-6025
Mfr. Part No.JBX1OUTLP09
HK$4,065.43
Each
units
Locator JBX - -
RS Stock No. 173-9632
Mfr. Part No.63827-1475
BrandMolex
HK$476.37
Each
units
Locator 207128 - 63827
RS Stock No. 885-9608
Mfr. Part No.127-0000-902
HK$107.79
Each
units
Positioner - - -
RS Stock No. 515-1096
Mfr. Part No.M22520/2-09
BrandGlenair
HK$2,023.56
Each
units
Positioner M22520/2-09 - -
RS Stock No. 864-3368
Mfr. Part No.1583527-1
HK$27,750.23
Each
units
Pneumatic Adapter 626 - -
RS Stock No. 885-9605
Mfr. Part No.127-0000-904
HK$108.50
Each
units
Positioner SMP - -
RS Stock No. 114-7920
Mfr. Part No.09990000112
BrandHARTING
HK$128.31
Each
units
Locator Han-Com - -
RS Stock No. 2509497517
Mfr. Part No.WT111M
HK$647.50
Each
units
- - - -
RS Stock No. 2508326619
Mfr. Part No.TA-0000-502
HK$7,876.68
Each
units
- - - -