- RS Stock No.:
- 236-9017
- Mfr. Part No.:
- SF2423-10B11
- Manufacturer:
- Sanyo Denki
7 In stock for delivery within 3 working days
Added
Price Each
HK$433.30
Units | Per unit |
1 - 4 | HK$433.30 |
5 - 9 | HK$423.00 |
10 + | HK$381.60 |
- RS Stock No.:
- 236-9017
- Mfr. Part No.:
- SF2423-10B11
- Manufacturer:
- Sanyo Denki
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- JP
Product Details
Sanyo Denki Stepper Motor, Bipolar Type, 3dB Noise Level - SANMOTION F2 Series - SF2423-10B11
Keep your machinery in line using this stepper motor from Sanyo Denki. It's made up of a central wire coil or rotor that moves with the current flow to align precisely with the stators. As this unit is a bipolar type, it comes with an onboard driver that turns the current flow in the opposite direction, meaning it's capable of reversing the motor movement. A low current rating of 1A per phase shows this component needs minimal energy to get the job done, making it an efficient choice.
Minimal holding torque of 0.56Nm reduces positioning time for swift movement
Broad operating temperature range between -10°C and +50°C for use in demanding conditions
Low noise level of 3dB for silent operation
Broad operating temperature range between -10°C and +50°C for use in demanding conditions
Low noise level of 3dB for silent operation
Applications
Medical technology
Robotics
Security systems
Packaging facilities
Robotics
Security systems
Packaging facilities
The Sanyo Denki dual shaft, bipolar, 2-phase stepping motor. In comparison to previous models holding torque has been increased approximately by 10%, have noise levels reduced approximately 3 dB(A) lower and motor efficiency has been improved by 2.4%. This contributes to reduction in power consumption of devices and the motor's heat dissipation.
What's the difference between a stepper motor and a servo motor?
Dual shaft, bi-polar with motor flange size of 42 mm sq
Motor length of 48mm and a DC input
Operating temperature range is -10°C to 50°C
Allowable radial load is 10 N
Allowable thrust load is 20 N
Reduced noise levels by 3 dB
Motor length of 48mm and a DC input
Operating temperature range is -10°C to 50°C
Allowable radial load is 10 N
Allowable thrust load is 20 N
Reduced noise levels by 3 dB
While a stepper motor is typically used for machine components that need precise positioning and control, a servo motor is used for equipment that works with high speed and torque. A servo motor comes with a feedback mechanism that relays its speed and position to the control system.
Specifications
Attribute | Value |
---|---|
Step Angle | 1.8° |
Holding Torque | 0.56Nm |
Number Of Wires | 4 |
Supply Voltage | 24 V |
Current Rating | 1 A/phase |