Weller WTHA 1 Hot Air station 900W, 230V, 50°C to 600°C

RS Stock No.:: 122-7920
Distrelec Article No.:: 301-64-358
Mfr. Part No.:: T0053173399
Manufacturer:: Weller

Weller WTHA 1 Hot Air station 900W, 230V, 50°C to 600°C

Subtotal (1 unit)**

HK$11,181.80

20 In stock for delivery within 3 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over HK$850.00

Units	Per unit
1 +	HK$11,181.80

**price indicative

RS Stock No.:: 122-7920
Distrelec Article No.:: 301-64-358
Mfr. Part No.:: T0053173399
Manufacturer:: Weller

Weller WTHA 1 Hot Air Station

From Weller, WTHA 1 is a single channel hot air station. With a power output of 900 W, this hot air station is a high power solution providing up to 100 litres of expanded hot air per minute. The WTHA 1 has been designed for reworking soldering and offers fast and safe performance. It will quickly melt solder, allowing you to remove components easily from Printed Circuit Boards (PCBs).

Features and Benefits:

This hot air rework station is stackable and can be stacked with other units in the WT series such as WT 1, WT 1H and WT 2M soldering stations. This gives the station a smaller footprint and allows you to save space on your workbench. The cover on the housing can also be lifted, allowing you to use the housing as storage space.

The WTHA 1 features a backlit LCD display. You can easily alter the brightness of the display, making the hot air station suitable for use in any environment.

The LCD display shows a bar graph to visualise the output power from the station. This makes it as simple as looking at the station to confirm the power output. The menu is easy to navigate and can be accessed at the touch of a button by simply pressing the menu button on the front of the unit.

This hot air station is supplied with 5 pre-set profiles. These settings cover the volume of hot air, the temperature and the time settings. Using 'profile mode' allows you to run the pre-set profiles in sequence depending on your application.

The temperature is electronically controlled, allowing for precise adjustments. A brushless turbine provides accurate adjustments to the hot air.

The power switch (or mains switch) is mounted on the front of the unit. This provides easier access for you to turn the hot air rework station on and off.

Typical Applications:

Hot air stations are designed to melt the solder and enable to remove components off circuit boards. Hot Air Stations are ideal for professional desoldering applications and they allow for resoldering simultaneously several components. Hot Air Stations are used to rework solder in all manner of applications, particularly in repairing or building PCB circuit boards with SMD and through-hole components. They are commonly used in electronic prototyping and production, and any application where a circuit board component might have to be removed or adjusted. Hot Air Stations are often used by:

Engineers

Electricians

Metalworkers

Jewellers

Home inventors

FAQs:

What do I get in the set?

The WTHA 1 Hot Air Station is supplied with:

Fixed hot air iron

Safety rest that is mounted on the side of the unit

What are the dimensions of this unit?

Width 212 mm

Depth 167 mm

Height 122 mm

Weight 1.95 kg

Hot Air - Weller

Attribute	Value
Model Number	WTHA 1
Plug Type	Type F - Schuko plug, Type G - British 3-pin
Tasks Supported	Hot Air
Wattage	900W
Primary Application Category	Digital Hot Air Desoldering Station
Input Voltage	230V
Output Power	900W
Soldering Tip Temperature	600°C
Maximum Operating Temperature	600°C
Number of Outputs	1
Display Type	LCD
ESD Safe	Yes