Schaffner FN 5030 Series 1000 V dc 75A 6 → 15kHz Line Reactor

  • RS Stock No. 883-8178
  • Mfr. Part No. FN5030-75-35
  • Manufacturer Schaffner
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): HU
Product Details

Schaffner FN5030

Schaffner's FN5030 add-on sine wave module eliminates premature motor failure caused bearing damage. The additional module is suitable for use with FN5040/5045 or FN 5020 sine wave output filters with corresponding current rating.

Improvement of system reliability
Improvement of EMC environment
Eliminates interference propagation towards components or conductors in the vicinity

Note

Important note FN5030 are additional common-mode modules. They can NOT work alone! FN5030 have to be operated downstream of a regular (symmetrical) sine wave output filter. Possible combinations are FN 5020/FN 5030 for motor frequencies up to 600 Hz or FN 5040/45, FN 5030 for max. 70 Hz. F.

Specifications
Attribute Value
Maximum Voltage Rating 1000 V dc
Series FN 5030
Maximum Current Rating 75A
Switching Frequency 6 → 15kHz
Dimensions 434 x 343 x 283mm
Depth 343mm
Height 283mm
Length 434mm
Maximum Operating Temperature +100°C
Minimum Operating Temperature -25°C
On back order for despatch 16/06/2020, delivery within 3 working days
Price Each
HK$ 22,776.34
(exc. GST)
units
Per unit
1 +
HK$22,776.34
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...