Telemecanique Sensors Differential for Air, Fresh Water, Sea Water Pressure Sensor, 12bar Max Pressure Reading , G1/4,

Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

Pressostats XMP Series

Pressostats for adjusting differential pressure in power circuits.
Systems with upright decompressor, quick-connection (6 mm) and an ON / OFF button.
Pressure check of fluids: air, fresh water, sea water (0 → +70 °C).
3 N / C output.
Female G 1/4 or G 3/8 hydraulic connection.
Electrical connection by 2 inputs with cable gland Pg 13.5.
Mounting bracket available as an accessory.

Output type: 3 N/C
Breaking capacity: 3 kW / 400 Vdc tri
Adjustment range: 1.3 → 12 bar
Electrical connection: Pg 13.5
Hydraulic connection: G 1 / 4 female 609-7088, 199-399
  G 3 / 8 female 609-7094
Dimensions (mm): 138 x 57 x 97.5
Protection index: IP54
Operating temperature: -25 °C → +70 °C

Single/Dual Threshold

Specifications
Attribute Value
Pressure Reading Type Differential
Minimum Pressure Reading 1.3bar
Maximum Pressure Reading 12bar
Accuracy 3.5 %
Media Measured Air, Fresh Water, Sea Water
Process Connection G1/4
Electrical Connection PG13.5 Cable Gland
Maximum Current 1.5 A
Housing Material Fibreglass
IP Rating IP54
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
10 Within 3 working day(s) (Global stock)
9 Within 3 working day(s) (Global stock)
Price Each
HK$ 363.30
(exc. GST)
units
Per unit
1 +
HK$363.30
Related Products
This range of base parts from LEDiL consists ...
Description:
This range of base parts from LEDiL consists of base parts and adapters for use with LENA and LENINA LED reflectors. They position and hold the LED in place before fixing the LED reflector on top.The LENA and LENINA base ...
Dialight Luxeon series PCB LED holders are made ...
Description:
Dialight Luxeon series PCB LED holders are made of a durable polycarbonate that can withstand high temperatures produced by constant lighting.
This range of base parts from LEDiL consists ...
Description:
This range of base parts from LEDiL consists of sockets and holders for use with BROOKE LED reflectors. They position and hold the LED in place before fixing the LED reflector on top.
This range of base parts from LEDiL consists ...
Description:
This range of base parts from LEDiL consists of sockets and adapters for use with BARBARA and MIRELLA LED reflectors. They position and hold the LED in place before fixing the LED reflector on top.The BARBARA and MIRELLA base parts ...