- RS Stock No.:
- 195-2614
- Mfr. Part No.:
- FSB50250B
- Manufacturer:
- onsemi
Discontinued product
- RS Stock No.:
- 195-2614
- Mfr. Part No.:
- FSB50250B
- Manufacturer:
- onsemi
Product overview and Technical data sheets
Legislation and Compliance
Product Details
The FSB50250B/BS is an advanced Motion SPM® 5 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC and PMSM motors. These modules integrate optimized gate drive of the built-in MOSFETs (FRFET® technology) to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts and thermal monitoring. The built-in high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal MOSFETs. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Motor Type | AC Induction, BLDC Motor, PMSM Motor |
Configuration | 3 Phase |
Maximum Supply Voltage | 20 V |
Mounting Type | Through Hole |
Package Type | SPM5P |
Pin Count | 23 |
Maximum Operating Supply Voltage | 20 V |
Typical Switching Frequency | 15kHz |
Maximum Isolation Rating | 1500Vrms |
Series | Motion SPM 5 |
Product Width | 12mm |
Maximum Operating Temperature | +150 °C |
Length | 29mm |
Product Length | 29mm |
Height | 3.3mm |
Width | 12mm |
Product Height | 3.3mm |
Minimum Operating Temperature | -40 °C |
Dimensions | 29 x 12 x 3.3mm |