Semikron SKHI 22A H4 R Dual IGBT Gate Driver,, 8A, 14.4 → 15.6 V

  • RS Stock No. 905-6235
  • Mfr. Part No. SKHI 22A H4 R
  • Manufacturer Semikron
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SEMIDRIVER™ Hybrid Dual IGBT Driver, Semikron

Driver for IGBT modules in bridge circuits in industrial applications.

Collector-Emitter voltage・・・SKHI 22 A (R):1200V、 SKHI 22 A / B (R):1700V
Output peak current 8A
Double driver for half-bridge IGBT modules
CMOS compatible inputs
Short circuit protection by VCE monitoring and switch off
Drive interlock top / bottom
Isolation by transformers
Supply under voltage protection (13V)
Error latch / output

MOSFET & IGBT Drivers, Semikron

Specifications
Attribute Value
Number of Drivers 2
Minimum Operating Supply Voltage 14.4 V
Maximum Operating Supply Voltage 15.6 V
Mounting Type Surface Mount
Peak Output Current 8A
Number of Outputs 2
Bridge Type Half Bridge
Input Logic Compatibility CMOS
Maximum Operating Temperature +85 °C
Time Delay 1.15µs
Width 55mm
Minimum Operating Temperature -40 °C
Length 55mm
Dimensions 55 x 55 x 16mm
Height 16mm
Stock check temporarily unavailable - call for stock availability
Price Each
Was HK$1,427.91
HK$ 1,337.08
(exc. GST)
units
Per unit
1 - 1
HK$1,337.08
2 - 3
HK$1,310.74
4 - 5
HK$1,284.99
6 - 11
HK$1,259.67
12 +
HK$1,234.95
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...