Silicon Labs, Si8275DBD-IM1

  • RS Stock No. 196-2374
  • Mfr. Part No. Si8275DBD-IM1
  • Manufacturer Silicon Labs
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Si8275DBD-IM1 devices provide options for a VIA, VIB inputs and Dual Driver driver. The Si8275DBD-IM1, with its high performance noise immunity, eliminates the risk posed by faster switching speeds. The high noise transients generated by the faster switching does not affect signal integrity through the driver, thereby eliminating the risk of loss of modulation. The very high latch-up spec of 400 kV/μs makes Si8275DBD-IM1 devices extremely robust, preventing permanent latch-up damage, and has UVLO fault protection, a de-glitch circuit for filtering noisy inputs, and highly precise dead time (DT pin) programmability. With this feature, users can precisely control the “dead time” between the two drivers switching to optimize system efficiency and safety. The drivers operate with a wide range of 2.5 V - 5.5 V input VDD and a maximum drive supply voltage of 30 V.

Specifications
Attribute Value
Number of Drivers 2
Minimum Operating Supply Voltage 2.5 V, 4.2 (Driver) V
Maximum Operating Supply Voltage 5.5 V, 30 (Driver) V
Topology Isolated Gate Driver
Mounting Type Surface Mount
Peak Output Current 1.8 ((Typ.) High Level) A, 4 ((Typ.) Low Level) A
Number of Outputs 1
Polarity Inverting
Package Type QFN
Pin Count 14
Bridge Type Half Bridge
Input Logic Compatibility TTL
High and Low Sides Dependency Independent
Length 5mm
Fall Time 18ns
Time Delay 75ns
Automotive Standard AEC-Q100
Maximum Operating Temperature +125 °C
Height 0.85mm
Dimensions 5 x 5 x 0.85mm
Minimum Operating Temperature -40 °C
Width 5mm
Rise Time 16ns
60 In stock for delivery within 3 working days
Price Each (In a Pack of 5)
HK$ 24.69
(exc. GST)
units
Per unit
Per Pack*
5 - 5
HK$24.69
HK$123.45
10 - 20
HK$24.448
HK$122.24
25 +
HK$24.06
HK$120.30
*price indicative
Packaging Options:
Related Products
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Glenair full nelson heatshrink boots (LSZH), series 77 ...
Description:
Glenair full nelson heatshrink boots (LSZH), series 77 type 2 for regulated environmental safety applications meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These LSZH semi rigid polyolefin heat shrink boots fit most standard heatshrink boot ...
Glenair full nelson lipless heatshrink boots, zero halogen, ...
Description:
Glenair full nelson lipless heatshrink boots, zero halogen, series 77 type 2 meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These halogen free polyolefin heat shrink boots have good resistance to oils, fuels and solvents and ...