RS PRO 2 x 58 W Anti-Corrosive Hazardous Area Light, 2, Fluorescent, Temp T4, 240 V ac, ATEX
- RS Stock No.:
- 539-6980
- Manufacturer:
- RS PRO
Discontinued product
- RS Stock No.:
- 539-6980
- Manufacturer:
- RS PRO
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
RS PRO 2 x 58 W, Anti-Corrosive Light Fitting, 2, Fluorescent, Temp T4, 240 V AC
This RS PRO anti-corrosive light fitting consists of two fluorescent luminaires. You can use it to provide illumination in hazardous environments, either inside or outside. It's classed as unrestricted breathing equipment, which means it doesnt need any routine testing during annual maintenance inspections.
The light has a moulded GRP (glass reinforced plastic) casing that's sturdy but lightweight and its strong polycarbonate diffuser will ensure good light distribution. The bi-pin fluorescent tubes are easy to access and change – simply release the stainless-steel clips and remove the diffuser.
Like all of our RS PRO range, this product has been tested by engineers for reliability and durability. There's an electronic HF (high-frequency) ballast for longer tube life and lower running costs. It comes with two M20 cable entries (one plugged) with three wire-and-earth terminals for a 2.5 mm cable. ATEX series XN certified, it's also suitable for use in hazardous areas.
The light has a moulded GRP (glass reinforced plastic) casing that's sturdy but lightweight and its strong polycarbonate diffuser will ensure good light distribution. The bi-pin fluorescent tubes are easy to access and change – simply release the stainless-steel clips and remove the diffuser.
Like all of our RS PRO range, this product has been tested by engineers for reliability and durability. There's an electronic HF (high-frequency) ballast for longer tube life and lower running costs. It comes with two M20 cable entries (one plugged) with three wire-and-earth terminals for a 2.5 mm cable. ATEX series XN certified, it's also suitable for use in hazardous areas.
Features and Benefits
• Anti-corrosive light fitting
• Suitable for hazardous areas
• Zone classification of 2 (for situations that will be hazardous infrequently)
• Temperature classification of T4 for a maximum temperature of +135°C
• Wattage of two x 58 W
• Fluorescent lamp
• Voltage rating of 240 V AC
• Anti-corrosive
• Dimensions of (L) 1.62 m x (W) 170 mm
• Individual lamp wattage of 58 W
• Two lamps
• EEX nc II 3 GD, EN50021 compliant for safety
• ATEX series XN certified for hazardous areas
• Suitable for hazardous areas
• Zone classification of 2 (for situations that will be hazardous infrequently)
• Temperature classification of T4 for a maximum temperature of +135°C
• Wattage of two x 58 W
• Fluorescent lamp
• Voltage rating of 240 V AC
• Anti-corrosive
• Dimensions of (L) 1.62 m x (W) 170 mm
• Individual lamp wattage of 58 W
• Two lamps
• EEX nc II 3 GD, EN50021 compliant for safety
• ATEX series XN certified for hazardous areas
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Note
Lamps are not included
Attribute | Value |
---|---|
Type | Anti-Corrosive |
Zone Classification | 2 |
Temperature Classification | T4 |
Wattage | 2 x 58 W |
Lamp Type | Fluorescent |
Voltage Rating | 240 V ac |
Anti-corrosive | Yes |
Length | 1.62 m |
Width | 170 mm |
Individual Lamp Wattage | 58W |
Number of Lamps | 2 |
Hazardous Area Certification | ATEX |
Series | XN |
Standards Met | EEX nc II 3 GD, EN50021 |