Renesas Electronics HIP2104FRAANZ-T7A, MOSFET 2, 2 A, 50V 12-Pin, DFN
- RS Stock No.:
- 193-1491
- Mfr. Part No.:
- HIP2104FRAANZ-T7A
- Manufacturer:
- Renesas Electronics
This product is currently unavailable to backorder.
Unfortunately, we don’t have this product in stock and it’s not available to backorder at this time.
Added
Price Each (On a Reel of 250)
HK$16.573
| Units | Per unit | Per Reel* |
| 250 - 1000 | HK$16.573 | HK$4,143.25 |
| 1250 + | HK$14.916 | HK$3,729.00 |
| *price indicative | ||
- RS Stock No.:
- 193-1491
- Mfr. Part No.:
- HIP2104FRAANZ-T7A
- Manufacturer:
- Renesas Electronics
Product overview and Technical data sheets
Legislation and Compliance
Product Details
The HIP2103 and HIP2104 are half-bridge drivers designed for applications using DC motors, 3-phase brushless DC motors, or other similar loads.
The two inputs (HI and LI) independently control the high-side driver (HO) and the low-side driver (LO). HI and LI can be configured to enable/disable the device, which lowers the number of connections to a microcontroller and the cost.
The low IDD bias current in the Sleep Mode prevents battery drain when the device is not in use, which eliminates the need for an external switch to disconnect the driver from the battery.
Integrated pull-down resistors on all of the inputs (LI, HI, VDen, and VCen) reduce the need for external resistors. An active low resistance pull-down on the LO output ensures that the low-side bridge FET remains off during the Sleep Mode or when VDD is below the Undervoltage Lockout (UVLO) threshold.
The HIP2104 has a 12V linear regulator and a 3.3V linear regulator with separate enable pins.
The two inputs (HI and LI) independently control the high-side driver (HO) and the low-side driver (LO). HI and LI can be configured to enable/disable the device, which lowers the number of connections to a microcontroller and the cost.
The low IDD bias current in the Sleep Mode prevents battery drain when the device is not in use, which eliminates the need for an external switch to disconnect the driver from the battery.
Integrated pull-down resistors on all of the inputs (LI, HI, VDen, and VCen) reduce the need for external resistors. An active low resistance pull-down on the LO output ensures that the low-side bridge FET remains off during the Sleep Mode or when VDD is below the Undervoltage Lockout (UVLO) threshold.
The HIP2104 has a 12V linear regulator and a 3.3V linear regulator with separate enable pins.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Logic Type | CMOS |
| Output Current | 2 A |
| Supply Voltage | 50V |
| Pin Count | 12 |
| Package Type | DFN |
| Fall Time | 30ns |
| Number of Outputs | 1 |
| Rise Time | 35ns |
| Topology | High and Low Side |
| High and Low Sides Dependency | Independent |
| Number of Drivers | 2 |
| Time Delay | 27µs |
| Bridge Type | Half Bridge |
| Mounting Type | Surface Mount |