Nexperia 74HC574PW,118 D Type Flip Flop IC, 3-State, 20-Pin TSSOP
- RS Stock No.:
- 170-5409
- Mfr. Part No.:
- 74HC574PW,118
- Manufacturer:
- Nexperia
6700 In stock for delivery within 3 working days
Added
Price Each (In a Pack of 50)
HK$2.575
| Units | Per unit | Per Pack* |
| 50 - 600 | HK$2.575 | HK$128.75 |
| 650 - 1200 | HK$2.51 | HK$125.50 |
| 1250 + | HK$2.472 | HK$123.60 |
| *price indicative | ||
- RS Stock No.:
- 170-5409
- Mfr. Part No.:
- 74HC574PW,118
- Manufacturer:
- Nexperia
Product overview and Technical data sheets
Legislation and Compliance
Product Details
The 74HC574: 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Logic Family | 74HC |
| Logic Function | D Type |
| Input Type | CMOS |
| Output Type | 3 State |
| Output Signal Type | Single Ended |
| Triggering Type | Positive Edge |
| Polarity | Non-Inverting |
| Mounting Type | Surface Mount |
| Package Type | TSSOP |
| Pin Count | 20 |
| Set/Reset | Yes |
| Number of Elements per Chip | 1 |
| Maximum Propagation Delay Time @ Maximum CL | 225 ns @ 50 pF |
| Maximum Operating Supply Voltage | 6 V |
| Dimensions | 6.6 x 4.5 x 0.95mm |
| Propagation Delay Test Condition | 50pF |
| Minimum Operating Temperature | -40 °C |
| Minimum Operating Supply Voltage | 2 V |
| Maximum Operating Temperature | +125 °C |
| Length | 6.6mm |
| Width | 4.5mm |
| Height | 0.95mm |