Telemecanique Sensors Plastic Fibre Optic Sensor 18 mm, IP64, IP641

Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Fibre Optic Light Guides for XUD Amplifiers

The diffuse scan types have figure of eight cross section cables which terminate in a round cross section at the sensing face. There are 2 core strands at the detector face.
Thru beam light guides (stock nos. 324-1636 and 281-1622) can be fitted with an optional lens (stock no. 324-1664) for increased sensing distances. (up to 400mm for 324-1636 and up to 1500mm for 281-1622)
The sensing distance of 200mm for stock no. 513-5549 is the maximum sensing distance. The distance is determined by the length the fibre is cut to
Operating temperature -25°C to +60°C

Note

Stock numbers 281-1600, 281-1616, 324-1636, 281-1622, 324-1658 and 324-1642 are stocked as spares only (RS no longer supplies the amplifiers with which they are used).

//media.rs-online.com/t_line/LD281160-01.jpg
//media.rs-online.com/t_line/LF281160-10.jpg
Specifications
Attribute Value
Detection Range 18 mm
Fibre Optic Type Plastic
IP Rating IP64, IP641
Housing Material PE
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
19 In stock for delivery within 3 working days
Price Each
HK$ 322.91
(exc. GST)
units
Per unit
1 - 5
HK$322.91
6 - 11
HK$301.17
12 +
HK$294.65
Related Products
Electronic calipers with an LCD display which will ...
Description:
Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model. Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish.
Vernier Caliper with hardened Stainless Steel frame and ...
Description:
Vernier Caliper with hardened Stainless Steel frame and jaws for extremely accurate outside, inside, step and depth measurements. Dual scale with both metric and imperial readingsManufactured from hardened steelFine adjustment mechanism with lockscrewsSuitable for general workshop and machine shop use. ...
A dial caliper manufactured from hardened stainless steelThe ...
Description:
A dial caliper manufactured from hardened stainless steelThe dial rotates for zero adjustment and can be locked in positionThe scale has 0.02mm division1 pointer revolution = 2mmA thumbwheel offers ease of operation, a knurled lockscrew locks jaws if required.
These feature hardened fulcrum studs which have a ...
Description:
These feature hardened fulcrum studs which have a large bearing surface to minimise side deflection. A quick release nut enables fast opening and closing of the calipers.RS Stock No: 224-5413 is an inside caliper.RS Stock No: 224-5429 is an outside ...