Amphenol Industrial 130055 Series Female RJ45 Connector, Panel Mount, Cat5e Straight 1 Port 8 -Way
- RS Stock No.:
- 385-1362
- Mfr. Part No.:
- 1300550001
- Manufacturer:
- Amphenol Industrial
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
HK$373.00
- RS Stock No.:
- 385-1362
- Mfr. Part No.:
- 1300550001
- Manufacturer:
- Amphenol Industrial
Panel Sockets
Sealed panel mounting shielded RJ45 sockets meet IP67 rating when mated with RJLnxx plugs and patch leads. All models are highly reliable and excellent quality.
Features & Benefits
The PCB version has solder pads for wire connection to the socket. Pads are clearly numbered against socket contacts
The through socket version has a fully shielded socket on the rear PCB. This allows immediate connection through an RJ45 plug. Ideal for greater serviceability and easy maintenance. Wired to 568B
The IDC version has colour coded terminal blocks allowing IDC terminations in seconds. Typical 110 punchdown hand tool stock no. 472-6740.
Direct PCB mount version, with front lock nut design is ideal for OEM applications where the receptacle is terminated directly onto a PCB. Which is then mounted into the device housing (overall depth 20.3 mm)
A fifth version has a 300 mm shielded cable and terminated RJ45 plug wired (568B) to the rear PCB. Facilitates rapid connection to internal sockets
A dust cap for unused sockets stock no 385-4197 is available separately. This gives an IP67 rating when fitted
Brad from Molex Female Connector, Cat5e, RJ45 - RJ-Lnxx Series - ENSP1F5
This Brad from Molex panel socket is an extension component that provides an Ethernet port on your printed circuit board (PCB). It's commonly used to integrate an RJ45 (Registered Jack) connector into a circuit design for transmission control protocol (TCP) or internet protocol (IP) communication applications. Thanks to ingress protection rating of IP67, you can be sure this device is dustproof and resistant to water. It also comes with a protective cap, making it a good choice for use in harsh industrial conditions. The connector is made of a robust ABS (acrylonitrile butadiene styrene) material for resistance to impact and corrosion, so it's a long-lasting choice.
• Compact dimensions of 49.53 (length) x 38.1mm (depth) for use in tight spaces
• Shielded port for advanced protection from electromagnetic interference
• Wide operating temperature range of -20°C to +80°C for use in a demanding environments
• Shielded port for advanced protection from electromagnetic interference
• Wide operating temperature range of -20°C to +80°C for use in a demanding environments
Applications
• Data communication
• Industrial equipment
• Electrical panel design
• Industrial equipment
• Electrical panel design
How do I install this connector?
This connector is a through-panel receptacle, meaning you can install it directly to a device using a standard male patch cord or jumper.
BRAD Range
Fully sealed (rated IP67) RJ45 connectors for use in environmentally demanding applications
Overmoulded and bonded envelopes protect data transmission in harsh applications against water, oil and dust ingress both for internal and external use
Connectors perform to category 5e standards and are available in shielded versions particularly suitable in electrically noisy environments
Overmoulded and bonded envelopes protect data transmission in harsh applications against water, oil and dust ingress both for internal and external use
Connectors perform to category 5e standards and are available in shielded versions particularly suitable in electrically noisy environments
Attribute | Value |
|---|---|
| Gender | Female |
| Ethernet Connector Type | RJ45 Connector |
| LAN Category | Cat5e |
| Number of Ports | 1 |
| Mounting Type | Panel Mount |
| Number of Ways | 8 |
| Connector Type | RJ45 |
| Shield Type | Shielded |
| Orientation | Straight |
| IP Rating | IP67 |
| Length | 49.53mm |
| Width | 49.8mm |
| Depth | 38.1mm |
| Series Number | 130055 |
| Series | 130055 |