Sirius 3SE2 Series Emergency Stop Foot Switch with Cover, 1 Pedal, Momentary Contacts, 2NO/2NC

  • RS Stock No. 764-4102
  • Mfr. Part No. 3SE2903-1AA20
  • Manufacturer Siemens
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

3SE2 9 Safety Foot Switch

The 3SE2 9 safety foot switch is available in a metal enclosure for rugged applications or a plastic enclosure for less harsh environments. These foot switches can be supplied with one or two pedals and with or without a cover.

Fixing holes for securing to the floor
Latching or momentary-contact versions
>10,000,000 operating cycles
Temperature rating -25 to +80 °C

Note

The single pedal safety foot switch, stock no. 764-4073, locks on actuation according to EN ISO 13850. After eliminating the hazard, the machine can only be restarted after manually releasing the push button on the top of the enclosure.

Standards

IEC 60947-5-1.

Emergency Stop Footswitch

Specifications
Attribute Value
Range SIRIUS
Series 3SE2
Pole and Throw Configuration DPST
Normal State Configuration 2NO/2NC
Contact Operation Momentary
Cover Yes
Number of Pedals 1
IP Rating IP65
Push Button Material Thermoplastic
Housing Material Aluminium
Housing Colour Grey
Width 156mm
Dimensions 265 x 156 x 138 mm
Length 265mm
Depth 138mm
6 Within 3 working day(s) (Global stock)
2 Within 4 working day(s) (Global stock)
Price Each
HK$ 1,405.29
(exc. GST)
units
Per unit
1 +
HK$1,405.29
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...