Toshiba, RN1106(F) NPN Digital Transistor, 100 mA 50 V 4.7 kΩ, Ratio Of 0.1, 3-Pin ESM

  • RS Stock No. 540-6554
  • Mfr. Part No. RN1106(F)
  • Manufacturer Toshiba
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Transistor with Built-in Resistor, BRT Series, Toshiba

Built-in bias resistors, use of fewer parts enables device size reduction and space-saving assembly
Wide resistance-value range makes product suitable for diverse applications
Complementary to products from RN1101 / RN2101 to RN1118 / RN2118
Applications: switching, inverter circuits, interface circuits, driver circuits
SSM package

//media.rs-online.com/t_line/LJ317606-01.gif
//media.rs-online.com/t_line/LJ317608-01.gif

Digital Transistors, Toshiba

Resistor-equipped bipolar transistors, also known as “Digital Transistors” or “Bias Resistor Transistors”, incorporating one or two integrated resistors. A single series input resistor, or a potential divider of two resistors, allows these devices to be directly driven from digital sources. Both single and dual transistor versions are available.

Specifications
Attribute Value
Transistor Type NPN
Number of Elements per Chip 1
Maximum Continuous Collector Current 100 mA
Maximum Collector Emitter Voltage 50 V
Typical Input Resistor 4.7 kΩ
Mounting Type Surface Mount
Package Type ESM
Pin Count 3
Minimum DC Current Gain 80
Transistor Configuration Single
Maximum Collector Emitter Saturation Voltage 0.3 V
Maximum Emitter Base Voltage 5 V
Typical Resistor Ratio 0.1
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +150 °C
Length 1.6mm
Height 0.7mm
Width 0.8mm
Dimensions 1.6 x 0.8 x 0.7mm
Stock check temporarily unavailable - call for stock availability
Price Each (In a Pack of 5)
Was HK$2.30
HK$ 0.62
(exc. GST)
units
Per unit
Per Pack*
5 - 20
HK$0.62
HK$3.10
25 - 120
HK$0.538
HK$2.69
125 - 245
HK$0.462
HK$2.31
250 - 495
HK$0.438
HK$2.19
500 +
HK$0.428
HK$2.14
*price indicative
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...