FLUKE i310S Current Probe & Clamp

  • RS Stock No. 401-422
  • Mfr. Part No. FLUKE I310S
  • Manufacturer Fluke
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Fluke AC/DC Current Clamp

The Fluke i30s AC/DC current clamp has a current rating of 300AAC and 450ADC. It is a state of the art device used with oscilloscopes and digital multimeters for accurate non-intrusive measurement and complex waveform currents.

Features and Benefits

Output cable and connections :safety BNC connector supplied with safety 4mm adapter
Power supply is a 9V alkaline
Low battery indicator
Zero adjustment
Output sensitivity: 10mV/A (40A) to mV/A (400A)
Resolution: ±50mA (40A) to ±100mA (400A)
Load impedance is greater10kohms and 100pF
Frequency range (small signal): DC to 20kHz (-3dB)
Phase shift below 1kHz, less than 2 degrees
Temperature coefficient: ±0.1% of reading /°C

Applications

Inverters
Switch mode power supplies
Industrial controllers
Automotive diagnostics
Other applications requiring current measurements
Waveform analysis

Certifications

EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
300Vrms CAT III safety rated
EN 61236 :1998 +A1, A2, and A3
IEC 61326-1
CE certified
cCSAus certified

Specifications
Attribute Value
Current 450A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 20kHz
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I310S
Best Accuracy ±1% + 300 mA
Safety Category Voltage 300V
Bandwidth 1kHz
Temporarily out of stock - back order for despatch when stock is available
Price Each
HK$ 3,712.66
(exc. GST)
units
Per unit
1 +
HK$3,712.66
Related Products
RS PRO offers this great tube connector that ...
Description:
RS PRO offers this great tube connector that fits 25 mm strut profile. It provides structural strength to the joints and connections. No screws are required as these are simply pushed together into the correct square tubing. These are great ...
Internal swivel tee can be used with straight ...
Description:
Internal swivel tee can be used with straight tube to give variable angles on hand rails, barriers, staircases or used in conjunction with other fittings to give various offset configurations.
Industrial stairs and working platforms can be built ...
Description:
Industrial stairs and working platforms can be built by the addition of further internal tension components and a beam profiles. Standard size for attaching components to profilesSlot stone can be inserted into the groove at any point along the profile, ...
The RK LightClamps plastic connection system guarantees flexibility ...
Description:
The RK LightClamps plastic connection system guarantees flexibility thanks to the design of its reducing bushes (sold separately). This design enables the clamping of the most various tube sections. The change to other diameters or sections requires only the change ...