Pressmaster KCC 0908S Ratchet Crimping Tool for Coaxial

  • RS Stock No. 298-1080
  • Mfr. Part No. 4300-2439
  • Manufacturer Pressmaster
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Pressmaster KCC 0908S Coaxial Hand Crimp Tool

The KCC 0908S is an ergonomic hand crimp tool for coaxial cable connectors. Producing 3.25 mm, 4.52 mm, 1.69 mm/.128'', 178", and 0.067” hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for a wide range of coaxial cable types including RG122/U, RG143A/U, RG174A/U, RG179B/U, RG180B/U, RG187A/U, RG188A/U, RG212/U, RG222/U, RG279/U, RG303/U, RG316/U, RG6 Quad, RG6A/U, Twinax

Features and Benefits:
• Non-slip main handle and low friction moving handle ensure a comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
• Unique mechanism significantly reduces hand force requirement over competing for crimping tools
• The non-slip pad holds the tool in place when used on a work surface
• Full cycle crimp mechanism to ensure consistent, reliable crimp
• Ratchet release mechanism to clear miscrimps and obstructions
• Precision eccentric adjustment for consistent performance and ability to calibrate
• Hole in handle allows attachment of safety strap for working overhead
• Each tool has a unique serial number for traceability
• Durable: lifespan exceeds 50000 cycles
• High strength, through hardened alloy Swedish steel construction

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

General Support Tooling

The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.

Crimp Tool Selection Guide
Tool Stock no BNC TNC N 1.6 / 5.6 SMA SMB UHF Mini UHF Die Set Apertures (mm) Typical Cable Types
298-1046   !         6.48, 5.41, 1.69 RG58, 59, 62, 71
298-1080           4.52, 3.25, 1.69 RG174, RG179
447-459               4.52, 1.69 MIN RG59, 179
456-431             5.38 to 5.43, RG58, URM43, URM76
456-447             6.45 to 6.50, RG59, RG62
473-0648       6.45 to 6.50, 1.68 to 1.71 RG59, URM70
456-778         6.48, 5.40, 1.70 n/a
241-8380             10.9, 5.41, 2.54, 1.69 RG58, 213, 214
Note: Where a ’! ’ is shown in this first table with respect to the 1.6 / 5.6 series of connectors, users should be aware that the two tools identified will crimp the outer ferrule of the connector only.
Die Set Selection Guide
Die Set Stock no Die Set Typical Cables (Cable Groups) Use Frame Tool Die Set Apertures
431-4432 Y1508 BT2002VQ 425-6156 0.057, 0.204 ( in )
431-4448 Y1503 BT3002VC 425-6156 0.057, 0.178 ( in )
431-4505 Y1509 BT2003VR 425-6156 0.057, 0.268 ( in )
425-6162 Y1829 BT2003 (H) 425-6156 0.068, 0.296 ( in )
431-4454 Y1514 RG58 (A) 425-6156 0.067, 0.213 ( in )
431-4460 Y1505 RG59 (F) 425-6156 0.057, 0.255 ( in )
431-4498 Y110 RG213 (T) 425-6156 0.10, 0.429 ( in )
848-436 - RG58, 59 (A, F, K) 848-391 6.48, 5.41, 1.72 ( mm )
282-3502 - RG174, 178, 179 (B, E, N) 848-391 3.25, 2.68, 1.71 ( mm )
158-8961 - BT2002, 2003 (H, J) 848-391 6.81, 5.18, 1.46 ( mm )
241-8396 - RG213, 214 (T, W) 848-391 10.89, 2.54, 2.03, 1.72 ( mm )
Specifications
Attribute Value
Series KCC 0908S
Crimp Connector Type Coaxial
Crimp Tool Type Ratchet
21 In stock for delivery within 3 working days
Price Each
HK$ 986.47
(exc. GST)
units
Per unit
1 +
HK$986.47
Related Products
The SCS ESD grounding cord is a 15ft ...
Description:
The SCS ESD grounding cord is a 15ft 20AWG PVC wire. It has moulded-in male snap fastener with integral 1Mohm resistor on one end and solderless terminal on other. It comes in black nylon cover with black polyester insert and ...
Our own brand of RS Pro ESD wrist-straps ...
Description:
Our own brand of RS Pro ESD wrist-straps feature premium grade fabric band with an elastic ratio of 1:2.5” to 1:3. The outer surface of the wristband is non-conductive and the inside surface of the strap is conductive lined with ...
Our RS Pro range of hard-wearing ESD grounding ...
Description:
Our RS Pro range of hard-wearing ESD grounding straps have been designed to ensure efficient static bleeding, to ensure a reliable method of static dissipation. Predominantly used within the electronics industry, but still suited to enthusiasts working at a bench. ...
The RS Pro anti-static wrist strap is a ...
Description:
The RS Pro anti-static wrist strap is a premium metal wrist band (stainless steel) that is adjustable and features a coiled cord. Its metal interior is great for grounding. This wrist strap will fit all wrists as its circumference adjusts ...