Eaton xStart DILMP Contactor, 230 V ac Coil, 4-Pole, 63 A, 18.5 kW, 4NO, 400 V ac
- RS Stock No.:
- 743-4986
- Mfr. Part No.:
- 109855 DILMP63(230V50HZ,240V60HZ)
- Manufacturer:
- Eaton
Price Each**
HK$2,321.44
3 In stock for delivery within 4 working days*
* Delivery dates may change based on your chosen quantity and delivery address.
FREE delivery for orders over HK$850.00
Units | Per unit |
|---|---|
| 1 + | HK$2,321.44 |
**price indicative
- RS Stock No.:
- 743-4986
- Mfr. Part No.:
- 109855 DILMP63(230V50HZ,240V60HZ)
- Manufacturer:
- Eaton
DILM Contactors, Single Phase
X Start is the latest generation of Contactors from Moeller, based on the tried and tested DIL series. This generation of modular Contactors benefit from the advances in technology for motor switching and control, which in turn gives the user a number of additional benefits.
Durable and able to handle all demands
Features immunity to interference and control circuit reliabililty even when used in conjumction with PLC's
Four normally-open main contacts
Features immunity to interference and control circuit reliabililty even when used in conjumction with PLC's
Four normally-open main contacts
DILM 580 A - 1400 A Contactors
These power contactors use vacuum technology which enables them to stay compact in size. The technology prevents the formation of open arcs and therefore the release of any switching gases allowing a tighter arrangement of the switchgear and smaller distances to the conductive structures.
Features and Benefits
• Compatible with the SmartWire-DT® communication system
• Identical sizes for AC and DC operated contactors
• Minimised heat dissipation - energy saving
• Direct Fieldbus connection
• Integrated suppressor circuit for DC models
• Suitable for up to 1,000 V
• AC/DC wide-range coil
• Low holding power
• Utilisation category AC 1 and AC 3
• Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
• Identical sizes for AC and DC operated contactors
• Minimised heat dissipation - energy saving
• Direct Fieldbus connection
• Integrated suppressor circuit for DC models
• Suitable for up to 1,000 V
• AC/DC wide-range coil
• Low holding power
• Utilisation category AC 1 and AC 3
• Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
Typical Applications
This range of contactors can be used across a multitude of applications, users will commonly find these contactors being used within industrial settings such as factory automation, railway transportation, electrical systems, electric motor, lighting, and mechanical engineering.
How contactors operate?
Contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, a contactor is a switch that can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts. If a device has the ability to switch more than 15 amperes it is called a contactor. These devices also feature high coil voltages which is rare within relays.
Standards
IEC/EN 60947, VDE 0660, UL, CSA
Eaton DILMP Series Contactor, 230V AC Coil Voltage, 4NO Normal State Configuration - 109855 DILMP63(230V50HZ,240V60HZ)
This contactor is designed for efficient control of 4 pole electric consumers, ensuring effective operation in automation and electrical systems. Operating at a coil voltage of 230V AC, it is suitable for various loads up to 63A, making it a pragmatic choice for industrial and commercial settings.
Features & Benefits
• Contact power rating of 18.5kW for strong performance
• Features screw terminals for secure and straightforward connections
• Conforms to IEC/EN 60947 standards for reliability
• Accommodates normal AC induction motors and slightly inductive loads
• Categorised under AC-1 utilisation for non-inductive applications
• Features screw terminals for secure and straightforward connections
• Conforms to IEC/EN 60947 standards for reliability
• Accommodates normal AC induction motors and slightly inductive loads
• Categorised under AC-1 utilisation for non-inductive applications
Applications
• Utilised for starting and stopping normal AC induction motors
• Compatible with resistance furnaces and electric heaters
• Employed in requiring control of electric consumables
• Suitable for industrial automation systems
• Compatible with resistance furnaces and electric heaters
• Employed in requiring control of electric consumables
• Suitable for industrial automation systems
How does this product cope with varying temperatures during operation?
It operates reliably across a wide range of temperatures from -25°C to +60°C.
What kind of connections can be expected with this device?
It is equipped with screw terminals, providing secure connections for all wiring.
Can it be integrated with existing electrical systems?
Yes, it is compatible with various electrical configurations used in industrial applications.
What are its main operational specifications?
This device functions at a coil voltage of 230V AC and efficiently handles currents up to 63A.
Note
Eaton formerly known as Moeller
Attribute | Value |
|---|---|
| Coil Voltage | 230 V ac |
| Number of Poles | 4 |
| Contact Voltage Rating | 400 V ac |
| Contact Current Rating | 63 A |
| Range | xStart |
| Series | DILMP |
| Power Rating | 18.5 kW |
| Normal State Configuration | 4NO |
| Number Of Auxiliary Contacts | 0 |
| Terminal Type | Screw |
| Length | 132mm |
| Width | 74mm |
| Depth | 132mm |
| Minimum Operating Temperature | -25°C |
| Pole and Throw Configuration | 4P |
| Maximum Operating Temperature | +60°C |
| Control Voltage | 230/240 V ac |