Sensata / Crydom DRC Series Solid State Contactor, 3-Pole

Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.

7.6 Amp Motor Controller rated Solid State Contactor
Load voltage range up to 530 VAC
Fits standard 35 mm DIN rail
LED input status indicator
AC or DC control
Zero crossing (resistive loads) or instantaneous turn-on (inductive loads) output
Built in Overvoltage Protection
Ultra-efficient thermal management design (Patented)
C-UL-US Listed, IEC Rated, CE & RoHS Compliant, Horsepower Rated
Embedded auxiliary contacts
DRC3R has reversing control (DRC3R includes On/Off and Forward/Reverse control in a compact 45 mm package)
Output terminals designed for an easy connection to multiple motor connections in parallel for a total up to 5 HP @ 480 Vac
Very low input control current
UL Listed, IEC60947-2 standard package

The reversing option has dual control inputs.

For a firm handle on the safe control of your industrial motors, choose this solid-state contactor from Sensata | Crydom. It's a reversing type, which means it includes an interlock that allows off, forward and reverse operations for versatility. The unit has no moving parts, so it's immune to wear for long-lasting performance. You can install it directly onto a DIN rail, making installation a snap. You'll find contactors like this one used to manage conveyors on assembly lines.

• Low I/O capacitance of 20pF to give high-integrity signals
• Wide operating temperature range between -30°C and +80°C for use in demanding settings
• MTBF of 1,398,000 hours for long-term performance
• Green and amber LED status indicators make monitoring and troubleshooting a breeze

Yes, this unit's IP20 rating means it's finger-safe and protected against objects larger than 12mm in size, helping to shield you from shock.

This device has screw terminals for hassle-free wire connection using just a screwdriver.

Solid State Contactors