Siemens Overload Relay NO/NC, 0.7 → 1 A, 1 A, 0.25 kW

  • RS Stock No. 243-6811
  • Mfr. Part No. 3RU1116-0JB0
  • Manufacturer Siemens
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Overload Relays – 3RU11 Range

Trip Class 10
Coil and auxiliary contact repeat terminals
Trip fault indication
Manual/auto reset
Single phase differential protection
Temperature compensated trip: -20°C to +60°C

Note

The width and height measurements of the overload relays are dependent on the contactor they are used on.

Standards

IEC947, VDE0990, EN60947

Approvals

UL, CSA

Warning

  • This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products.
Specifications
Attribute Value
FLC Motor Rating 0.7 → 1 A
Contact Current Rating 1 A
Pole Configuration 3P
Range Sirius Classic
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Series 3RU
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 0.25 kW
Terminal Type Screw
Reset Method Automatic, Manual
Width 45mm
Length 87mm
Depth 78mm
Minimum Operating Temperature -20°C
Operating Temperature Range -20 → +70 °C
Maximum Operating Temperature +70°C
Temporarily out of stock - back order for despatch when stock is available
Price Each
HK$ 418.82
(exc. GST)
units
Per unit
1 - 5
HK$418.82
6 - 11
HK$393.70
12 +
HK$376.94
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...