Silicon Labs Wi-SUN Wireless Starter Kit EFR32MG12 Wireless SoC WiFi Development Board for EFR32MG12 Mighty Gecko

A Wi-SUN Wireless Starter Kit (WSTK) with 868-915 MHz Radio Boards (BRD4170A) is an excellent starting point to get familiar with the EFR32™ FG12 and MG12 Wireless System-on-Chip solutions. It provides all necessary tools for developing a Wi-SUN wireless applications.

The Wireless Starter Kit Mainboard contains an on-board J-Link debugger with a Packet Trace Interface and a virtual COM port, enabling application development and debugging of the attached radio board as well as external hardware. The mainboard also contains sensors and peripherals for easy demonstration of some of the EFR32's many capabilities.

BRD4170A is a plug-in board for the Wireless Starter Kit Mainboard. It is a complete reference design for the EFR32MG12 Wireless SoC, with 19 dBm output power, a PCB antenna for the 2.4 GHz band, and an SMA connector and a wide-band matching network for operation in either the 868 MHz or the 915 MHz band.

Advanced Energy Monitor
Packet Trace Interface
Virtual COM Port
SEGGER J-Link on-board debugger
External device debugging
Ethernet and USB connectivity
Silicon Labs Si7021 Relative Humidity and Temperature sensor
Low Power 128x128 pixel Memory LCD
User LEDs / Pushbuttons
20-pin 2.54 mm EXP header
Breakout pads for Wireless SoC I/O
CR2032 coin cell battery support
EFR32MG12 Mighty Gecko Wireless SoC with 1024 kB Flash, and 256 kB RAM (EFR32MG12P433F1024GM68)
Dual band integrated radio transceiver
19 dBm output power
Inverted-F PCB antenna (2.4 GHz)
SMA antenna connector (868-915 MHz)

3 x Wireless starter kit mainboard
3 x 2.4 GHz/915MHz 19 dBm radio boards
AA Battery Board (supports running +19 from battery)
Cables

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.