ON Semiconductor NCP4305DDR2G Secondary Side Controller 500 kHz 8-Pin, SOIC

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCP4305 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi resonant flyback, forward and half bridge resonant LLC. The combination of externally adjustable minimum off-time and on-time blanking periods helps to fight the ringing induced by the PCB layout and other parasitic elements. A reliable and noise less operation of the SR system is insured due to the Self Synchronization feature.

Precise True Secondary Zero Current Detection with Adjustable Threshold
Typically 20 ns Turn off Delay from Current Sense Input to Driver
Zero Current Detection Pin Capability
Adjustable Minimum ON Time and Minimum OFF Time
Self Synchronization
Light Load Detection with Modulated Gate Drive
Improves performance for applications working in deep CCM
Enters the IC into a low consumption standby mode

Specifications
Attribute Value
Controller Type Synchronous Rectifier Controller
Number of Outputs 1
Maximum Switching Frequency 500 kHz
Width 4mm
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 5 x 4 x 1.5mm
Length 5mm
Height 1.5mm
Maximum Input Voltage 9.4 V
Maximum Operating Temperature 125 °C
Maximum Output Voltage 17 V
Minimum Input Voltage 7.3 V
Output Voltage Range -0.3 → 17 V
Minimum Operating Temperature -40 °C
Minimum Output Voltage -0.3 V
Operating Temperature Range -40 → +125 °C
Output Current Range 4 A, 8 A
Input Voltage Range 7.3 → 9.4 V
On back order for despatch 21/04/2020, delivery within 3 working days
Price Each (On a Reel of 2500)
HK$ 5.01
(exc. GST)
units
Per unit
Per Reel*
2500 +
HK$5.01
HK$12,525.00
*price indicative
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...