RF Amplifier Modules

Filters

Viewing 1 - 4 of 4 products
Results per page
Description Price Typical Output Power Typical Power Gain Maximum Operating Frequency Number of Channels per Chip Pin Count Dimensions Length Width Maximum Operating Supply Voltage Amplifier Type Height Maximum Operating Temperature Minimum Operating Supply Voltage Minimum Operating Temperature
RS Stock No. 160-2669
Mfr. Part No.HMC561LP3E
HK$378.05
Each (On a Reel of 50)
units
14dBm - 10.5 GHz 2 16 3.1 x 3.1 x 1mm 3.1mm 3.1mm 5.5 V Low Noise Amplifier 1mm +85 °C 4.5 V -40 °C
RS Stock No. 862-6183
Mfr. Part No.HMC561LP3E
HK$436.58
Each
units
14dBm - 10.5 GHz 2 16 3.1 x 3.1 x 1mm 3.1mm 3.1mm 5.5 V Low Noise Amplifier 1mm +85 °C 4.5 V -40 °C
RS Stock No. 160-2696
Mfr. Part No.HMC462LP5E
HK$1,268.83
Each (On a Reel of 50)
units
15dBm 14 dB 20 GHz 1 32 5.1 x 5.1 x 1mm 5.1mm 5.1mm 8.5 V Low Noise Amplifier 1mm +85 °C 4.5 V -40 °C
RS Stock No. 862-6376
Mfr. Part No.HMC462LP5E
HK$1,219.31
Each
units
15dBm 14 dB 20 GHz 1 32 5.1 x 5.1 x 1mm 5.1mm 5.1mm 8.5 V Low Noise Amplifier 1mm +85 °C 4.5 V -40 °C
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...