Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 1 - 20 of 28 products
Results per page
Description Price Capacity Puller Type Hydraulic Force Operation Number of Pieces
RS Stock No. 732-4735
Mfr. Part No.TMMK 10-35
BrandSKF
HK$11,723.86
Each
units
10 → 35 mm Bearing Puller - Hand -
RS Stock No. 612-5694
Mfr. Part No.TMMD100
BrandSKF
HK$7,333.04
Each
units
10 → 100 mm Bearing Puller - Hand 22
RS Stock No. 612-5688
Mfr. Part No.TMMA 60
BrandSKF
HK$3,374.15
Each
units
36 → 150 mm Bearing Puller - Hydraulic -
RS Stock No. 189-538
Mfr. Part No.TMIP 7-28
BrandSKF
HK$4,214.73
1 Kit
Kit(s)
7 → 9 mm, 10 → 12 mm, 15 → 17 mm, 20 → 28 mm Bearing Puller - Hand 6
RS Stock No. 845-8356
Mfr. Part No.TMMP 2X65
BrandSKF
HK$601.23
Each
units
65.0 mm Bearing Puller 0.7t Lever Press -
RS Stock No. 732-4785
Mfr. Part No.TMMX 350
BrandSKF
HK$570.86
Each
units
- Protection Blanket - - -
RS Stock No. 885-5322
Mfr. Part No.729101/400MPA
BrandSKF
HK$39,083.96
Each
units
200.0 cm³ Bearing Puller 400.0MPa Hand -
RS Stock No. 845-8359
Mfr. Part No.TMMP 2X170
BrandSKF
HK$1,278.00
Each
units
170.0 mm Bearing Puller 2.0t Hand -
RS Stock No. 124-8462
Mfr. Part No.TMMR40F
BrandSKF
HK$496.55
Each
units
48 (External) mm, 67 (Internal) mm Bearing Puller - Hand -
RS Stock No. 124-8470
Mfr. Part No.TMSC-10
BrandSKF
HK$1,162.78
Each
units
- Bearing Puller - Hand -
RS Stock No. 124-8452
Mfr. Part No.TMMR200F
BrandSKF
HK$1,393.60
Each
units
204.0 mm Bearing Puller - Hand -
RS Stock No. 124-8448
Mfr. Part No.TMMR120F
BrandSKF
HK$950.58
Each
units
124 (External) mm, 139 (Internal) mm Bearing Puller - Hand -
RS Stock No. 190-601
Mfr. Part No.TMHC 110 E
BrandSKF
HK$10,144.59
1 Kit
Kit(s)
- Bearing Puller 11.2t Hydraulic -
RS Stock No. 124-8453
Mfr. Part No.TMMR350F
BrandSKF
HK$1,757.35
Each
units
354.0 mm Bearing Puller - Hand -
RS Stock No. 124-8444
Mfr. Part No.TMHS100
BrandSKF
HK$5,021.12
Each
units
- Bearing Puller - Hydraulic -
RS Stock No. 124-8472
Mfr. Part No.TMFT33-B20/42
BrandSKF
HK$130.12
Each
units
- Impact Ring - Hand -
RS Stock No. 124-8466
Mfr. Part No.TMMR80F
BrandSKF
HK$724.95
Each
units
83 (External) mm, 97 (Internal) mm Bearing Puller - Hand -
RS Stock No. 845-8353
Mfr. Part No.TMMP 3X185
BrandSKF
HK$1,723.78
Each
units
185.0 mm Bearing Puller 2.7t Hand -
RS Stock No. 124-8460
Mfr. Part No.TMMR250F
BrandSKF
HK$1,664.79
Each
units
254.0 mm Bearing Puller - Hand -
RS Stock No. 124-8451
Mfr. Part No.TMMP3X300
BrandSKF
HK$2,684.27
Each
units
300.0 mm Bearing Puller - Mechanical -