Martindale PD440 Voltage Indicator Proving Unit 440V

  • RS Stock No. 740-1479
  • Mfr. Part No. PD440
  • Manufacturer Martindale
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PH
Product Details

MARTINDALE PD430 and PD440 Proving Unit

Using a voltage indicator without first proving it is working correctly has proved fatal. The Martindale PD430 proving unit features a low 50V check as well as a high 440Vac, the PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations

Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery

Note

Compatible with the Martindale VI13700G & the new Martindale VI13700/2.

Martindale Proving Units

The Martindale proving unit has an output voltage rating of 440VAC. The units can be powered by either alkaline batteries or a 12V power supply. There are two power supply units for the proving devices such as PSUPD230 and PSUHPAT12. The PSUPD230 can be connected to mains power and the PSUHPAT12 is a 12V power supply suitable for use in a car/van cigarette lighter. It is compatible with the VI13700G and the new VI13800.

Features and Benefits

• Suitable for multimeters, voltage testers and Drummond test lamps
• Safely and simply proves the operation of voltage indicators and test lamps
• Essential for implementing effective safe isolation procedures
• Industry-leading proving unit for all low and high impedance testers
• Long battery life time with low battery indicator
• Optional in-car and mains power supply available
• Battery of 6xLR6 / MN1500 1.5V alkaline batteries or equivalent
• Operating temperature ranges between -10°C and 40°C

Applications


Digital multimeters
• Clamp meters
• Electrical testers

Mains Voltage Indicators - Contact

Specifications
Attribute Value
Output Voltage 440V
Battery Type AA
Power Source Battery
Dimensions 143 x 84 x 50mm
Weight 400g
Height 50mm
Length 143mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -10°C
Model Number p PD440
Width 84mm
28 In stock for delivery within 3 working days
Price Each
HK$ 1,045.99
(exc. GST)
units
Per unit
1 +
HK$1,045.99
Related Products
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam ...
Description:
Lower handle effort reduces operator fatigueFully serviceableHigh-strength beam and pump linkage for long lifePumping handle included on all modelsSafety relief valve to prevent overloadAutomatic by-pass port to prevent over-extensionWiper seal for extended lifeThick base material with large area for increased ...