- RS Stock No.:
- 183-2592P
- Mfr. Part No.:
- HMC470ALP3E
- Manufacturer:
- Analog Devices
- RS Stock No.:
- 183-2592P
- Mfr. Part No.:
- HMC470ALP3E
- Manufacturer:
- Analog Devices
Product overview and Technical data sheets
Legislation and Compliance
Product Details
The HMC470A is a 5-bit digital attenuator with a 31 dB attenuation control range in 1 dB steps. The HMC470A offers excellent attenuation accuracy and high input linearity over the specified frequency range from 100 MHz to 3 GHz. However, this digital attenuator features ACG pins for external ac grounding capacitors to extend the operation below 100 MHz. The HMC470A operates with a single positive supply voltage from 3 V to 5 V and provides CMOS-/TTL-compatible parallel control interface by incorporating an on-chip driver. The HMC470A comes in a compact, 3 mm ´ 3 mm LFCSP package.
Attenuation range: 1 dB LSB steps to 31 dB
Insertion loss: 1.7 dB typical at 3 GHz
Excellent attenuation accuracy: 0.3 dB typical
High Input linearity
0.1dB compression (P0.1dB): 27 dBm typical
Third-order intercept (IP3): 48 dBm typical
High power handling: 27 dBm
Low phase shift: 27° at 3 GHz
Single-supply operation: 3 V to 5 V
CMOS-/TTL-compatible parallel control
16-lead, 3 mm ´ 3 mm LFCSP package
Controlled manufacturing baseline
One assembly/test site
One fabrication site
Applications
Cellular infrastructure
Microwave radios and very small aperture terminals (VSATs)
Test equipment and sensors
IF and RF designs
Insertion loss: 1.7 dB typical at 3 GHz
Excellent attenuation accuracy: 0.3 dB typical
High Input linearity
0.1dB compression (P0.1dB): 27 dBm typical
Third-order intercept (IP3): 48 dBm typical
High power handling: 27 dBm
Low phase shift: 27° at 3 GHz
Single-supply operation: 3 V to 5 V
CMOS-/TTL-compatible parallel control
16-lead, 3 mm ´ 3 mm LFCSP package
Controlled manufacturing baseline
One assembly/test site
One fabrication site
Applications
Cellular infrastructure
Microwave radios and very small aperture terminals (VSATs)
Test equipment and sensors
IF and RF designs
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Maximum Attenuation | 31dB |
Maximum Frequency | 3GHz |
Maximum Insertion Loss | 2dB |
Mounting Type | Surface Mount |
Package Type | LFCSP |
Pin Count | 16 |
Dimensions | 3.1 x 3.1 x 0.85mm |
Length | 3.1mm |
Width | 3.1mm |
Height | 0.85mm |
Maximum Operating Supply Voltage | 5 V |
Maximum Operating Temperature | +85 °C |
Minimum Operating Supply Voltage | 3 V |
Minimum Operating Temperature | -40 °C |