STMicroelectronics STUSB4710AQTR, USB Controller, 400kbit/s, I2C, USB 2.0, USB C, 4.1 → 22 V, 24-Pin QFN

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The STUSB4710 is a new family of USB power delivery controllers communicating over Type-C™ configuration channel pins (CC) to negotiate a given amount of power to be sourced to an inquiring consumer device.The STUSB4710 addresses provider/DFP devices such as notebooks, tablets and AC adapters. The device can handle any connections to a UFP or DRP without any MCU attachment support, from device attachment to power negotiation, including VBUS discharge and protections

USB power delivery (PD) controller
Type-C attach and cable orientation detection
Single role: provider - DFP
Full hardware solution - no software
I2 C interface (optional connection to MCU)
Support all USB PD profiles: up to 5 power data objects (PDO)
Configurable start-up profiles
Integrated VBUS voltage monitoring
Internal and/or external VBUS discharge path
Short -to-VBUS protections on CC pins (22 V) and VBUS pins (28 V)

Specifications
Attribute Value
Data Rate 400kbit/s
Protocols Supported I2C, USB 2.0, USB C
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 4.1 → 22 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 24
Dimensions 4.05 x 4.05 x 0.95mm
Height 0.95mm
Length 4.05mm
Maximum Operating Temperature +105 °C
Minimum Operating Temperature -40 °C
Width 4.05mm
On back order for despatch 01/05/2020, delivery within 3 working days
Price Each (On a Reel of 4000)
HK$ 8.55
(exc. GST)
units
Per unit
Per Reel*
4000 +
HK$8.55
HK$34,200.00
*price indicative
Related Products
Maximum system length: 75 mSwitch function: 2 NC ...
Description:
Maximum system length: 75 mSwitch function: 2 NC + 2 NO (standard)Built-in reset buttonCable pull eyelet, low costVisualisation of correct cable tensionMeets EN418 and IEC947-5-5Protection class IP67.
The Telemecanique sensors XY2CE is 240VAC rated voltage ...
Description:
The Telemecanique sensors XY2CE is 240VAC rated voltage wire switch. It has E-stop rope pull switch on left side-2NC+2NO with yellow pilot light, 230V-boot. • Contact operation slow break• Cover material is stainless steel• Housing material is Zamak• Maximum rope ...
The PSENrope from Pilz is a manually operated ...
Description:
The PSENrope from Pilz is a manually operated rope pull switch used to safely shut down functional processes that extend over a wide area, such as conveyors. It provides maximum safety, as the emergency stop function can be triggered at ...
The ER series of safety rope pull switches ...
Description:
The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage spans, rope pull switches eliminate the need for numerous E-stop buttons reducing installation time ...